which injectors?

How the engine works

Moderators: Greenleaf, KTA, BC847, Richie O

Re: which injectors?

Postby ellis93 » Sun Mar 10, 2013 3:55 pm

Check out this item I found on eBay:

End time: Apr 3, 2013 12:59:27 PM

Item: 16cm Exhaust housing BD Dodge Diesel Cummins Turbo WH1C

URL: http://pages.ebay.com/motors/link/?nav= ... 0706067582

Alt URL: http://www.ebay.com/itm/16cm-Exhaust-ho ... 0706067582

(Sent from eBay Mobile for Android)
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7762
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi

Re: which injectors?

Postby RCCUMMINS89 » Sun Mar 10, 2013 4:00 pm

ellis93 wrote:The 16cm housings you can pick up for 160$ just about any where. Check out Ebay,I've seen them on there



I carry them as well. For $151.00
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID

Re: which injectors?

Postby blackvmax07 » Sun Mar 10, 2013 5:19 pm

will i notice a power difference goin to a 16mm? Wat exactly do i have stock? Sorry for all the questions im new to the cummins thing. Am i better off changing the housing or doin an hx35? Thanks for the help fellas
blackvmax07
fuel screw!!!!
 
Posts: 31
Joined: Sat Sep 01, 2012 7:48 pm
Top

Re: which injectors?

Postby ellis93 » Sun Mar 10, 2013 5:25 pm

It's either 18 or 21cm,the number is cast in the housing around the outlet.
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7762
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: which injectors?

Postby blackvmax07 » Mon Mar 11, 2013 5:22 pm

Ok ill look, I was looking at maybe just doin the hx35, is that a good upgrade? Where can I get a new one? Iv hears of people getting the Chinese ones so im sceptical on where to get it
blackvmax07
fuel screw!!!!
 
Posts: 31
Joined: Sat Sep 01, 2012 7:48 pm
Top

Re: which injectors?

Postby cmann250 » Mon Mar 11, 2013 6:38 pm

I really like my HX35. It's probably my favorite mod and it's essentially drop in. On the air side, it's just a bit of an upgrade, but the 12 cm exhaust housing is very much of an upgrade over the 18 and I suspect a night and day difference over the 21 cm exhaust housing.

I gave $80 for mine and swapped it in without doing anything. I'm adventurous :lol: I'm beginning to believe that even the true blue Holsets are from China, but I can't prove it. :?
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: which injectors?

Postby RCCUMMINS89 » Mon Mar 11, 2013 6:44 pm

An hx35 is essentially the same thing (slightly better) than your h1c with a 12cm housing.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: which injectors?

Postby blackvmax07 » Mon Mar 11, 2013 9:08 pm

Ok thats wat ima get then, do I need to but the hx35 new or can I find one at a junk yard?
blackvmax07
fuel screw!!!!
 
Posts: 31
Joined: Sat Sep 01, 2012 7:48 pm
Top

Re: which injectors?

Postby RCCUMMINS89 » Tue Mar 12, 2013 8:36 am

Go with a used one. If you are going to pay the money for a new one, there are better turbos to buy for not much more. LIke a Super B for about a grand, or a 60/68 for a touch more
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: which injectors?

Postby apexfd » Sat Jun 01, 2013 9:19 pm

How do people like the he351cw on stock injectors for towing?
apexfd
fuel screw!!!!
 
Posts: 25
Joined: Sat Jun 01, 2013 8:37 pm
Top

Previous

Return to Engine

Who is online

Users browsing this forum: No registered users and 14 guests

cron