Turbos he351 and s363sxe choices

How the engine works

Moderators: Greenleaf, KTA, BC847, Richie O

Turbos he351 and s363sxe choices

Postby Justgosurfin » Wed Dec 04, 2019 9:41 am

So I decided to go the he351 route for now bc the PO gave me one when I bought the van (1990 12v swapped E350)

Over the next year I think I’ll start doing valve springs and studs to get ready for a s362sxe, but need to make sure it will fit with my flipped manifold and lack of space.

Does anyone have a pic of their 362 with wastegate? Just trying to get an idea of how it’s oriented.

Also any comments on spool time for the borg warner? I drive around town a lot and want quick spool and little to no smoke.

Thanks.
1995 Ford E350
‘90 12v
Dana60-NV4500- NV271-10.5
2nd gen IC
THD Pin and HVLP
3200 spring
Timing spacer
370 injectors
Justgosurfin
fuel pin?
 
Posts: 9
Joined: Mon Jun 11, 2018 8:08 am
Location: South Florida

Re: Turbos he351 and s363sxe choices

Postby BC847 » Wed Dec 04, 2019 5:04 pm

Keep in mind this install is with the stock location manifold that's been flipped . . . .

Image
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2087
Joined: Wed Jan 03, 2007 5:22 pm

Re: Turbos he351 and s363sxe choices

Postby Justgosurfin » Fri Dec 13, 2019 3:00 pm

Thanks that’s exactly what I needed to see. My manifold is flipped.

How much does the wastegate actuator stick out past the compressor housing?
1995 Ford E350
‘90 12v
Dana60-NV4500- NV271-10.5
2nd gen IC
THD Pin and HVLP
3200 spring
Timing spacer
370 injectors
Justgosurfin
fuel pin?
 
Posts: 9
Joined: Mon Jun 11, 2018 8:08 am
Location: South Florida
Top

Re: Turbos he351 and s363sxe choices

Postby Justgosurfin » Fri Dec 13, 2019 3:01 pm

BC847 wrote:Keep in mind this install is with the stock location manifold that's been flipped . . . .

Image



Also, what do you use that stand for?
1995 Ford E350
‘90 12v
Dana60-NV4500- NV271-10.5
2nd gen IC
THD Pin and HVLP
3200 spring
Timing spacer
370 injectors
Justgosurfin
fuel pin?
 
Posts: 9
Joined: Mon Jun 11, 2018 8:08 am
Location: South Florida
Top

Re: Turbos he351 and s363sxe choices

Postby BC847 » Mon Dec 16, 2019 3:31 pm

Justgosurfin wrote:Thanks that’s exactly what I needed to see. My manifold is flipped.

How much does the wastegate actuator stick out past the compressor housing?


2~3ish inches give or take.
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2087
Joined: Wed Jan 03, 2007 5:22 pm
Top

Re: Turbos he351 and s363sxe choices

Postby BC847 » Mon Dec 16, 2019 3:36 pm

Justgosurfin wrote:Also, what do you use that stand for?

I built it to generally mimic the basic long-block for the purpose of fitting mess to it.

Image
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2087
Joined: Wed Jan 03, 2007 5:22 pm
Top


Return to Engine

Who is online

Users browsing this forum: No registered users and 4 guests