injection pump leaking

How the engine works

Moderators: Greenleaf, KTA, BC847, Richie O

injection pump leaking

Postby cummins32 » Thu Mar 29, 2012 7:05 pm

My injection pump was leaking tonight on the side closest to the fender any idea what it is ? Also when my friend shut it off I heard what sounded like air being sucked in by the exhaust, this is my first diesel and everythings scaring me haha
Diamond eye 4 inch turbo back, Glowshift boost, egt, oil pressure,hx35 , 3200 rpm spring, full power screw 2 turns, denny T II fuel pin, Home made Cold air intake, Alto reds and tci TC in a 518, 5x12's from diesel auto power.
cummins32
fuel screw!!!!
 
Posts: 203
Joined: Wed Mar 14, 2012 8:47 am
Location: Northern Indiana

Re: injection pump leaking

Postby CumminsPower59 » Thu Mar 29, 2012 7:11 pm

There are quite a few places on that side that could be leaking, KSB, shutdown lever o-ring, etc. Try and get 'er dryed off and run it for a minute and see if you can spot where it's coming from. Re-seal kits for the VE are plenty cheap ;)
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!

Re: injection pump leaking

Postby cummins32 » Thu Mar 29, 2012 7:40 pm

Ok thanks and any idea about the exhaust noise i was hearing
Diamond eye 4 inch turbo back, Glowshift boost, egt, oil pressure,hx35 , 3200 rpm spring, full power screw 2 turns, denny T II fuel pin, Home made Cold air intake, Alto reds and tci TC in a 518, 5x12's from diesel auto power.
cummins32
fuel screw!!!!
 
Posts: 203
Joined: Wed Mar 14, 2012 8:47 am
Location: Northern Indiana
Top

Re: injection pump leaking

Postby cummins32 » Thu Mar 29, 2012 7:57 pm

It's leaking from underneath the spring that's underneath the tps
Diamond eye 4 inch turbo back, Glowshift boost, egt, oil pressure,hx35 , 3200 rpm spring, full power screw 2 turns, denny T II fuel pin, Home made Cold air intake, Alto reds and tci TC in a 518, 5x12's from diesel auto power.
cummins32
fuel screw!!!!
 
Posts: 203
Joined: Wed Mar 14, 2012 8:47 am
Location: Northern Indiana
Top

Re: injection pump leaking

Postby CumminsPower59 » Fri Mar 30, 2012 5:00 am

Sounds like the o ring on the trottle shaft. The noise you heard from the exhaust is normal. When the engine is stopped, it takes a second or three for the turbo to stop spinning, it will make a little noise when doing so, like the sound of air moving.
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: injection pump leaking

Postby Black93 » Fri Mar 30, 2012 5:56 am

x2 on the throttle shaft seal. Might as well throw a gov spring in while you're in there. You can get a seal kit & spring for less than $50.
1993 W350 LE ext. cab dually, tuned pump, 60mm HX35, NV4500, 4" straight tbe, 366, 1/8" bump, THD fuel pin & lppp, DPS manifold, DFI 5x12's, 3" tubes, PS IC, D80 rear, 3.54's, 4th gen Alcoas.
User avatar
Black93
fuel screw!!!!
 
Posts: 231
Joined: Mon Aug 17, 2009 10:33 am
Location: TN
Top


Return to Engine

Who is online

Users browsing this forum: No registered users and 41 guests