P pump block
Moderators: Greenleaf, KTA, BC847, Richie O
2 posts
• Page 1 of 1
P pump block
by Ram360man » Wed Oct 24, 2012 10:33 pm
P pump engines have the same block as a ve correct? Found a short block for 400 out of a 95. Only need the block. Otherwise I have a bluebird with a ve I can pull the engine from.
1989 W250. Maxed fuel pump. 5x14. 63/68/14. PS Intercooler. 4200 gov spring. 188/220 cam. Built 727
1989 W250 60mm gds. 2.5 inch crossover. turned up pump. Stock 727.
1989 W250 60mm gds. 2.5 inch crossover. turned up pump. Stock 727.
-
Ram360man - fuel screw!!!!
- Posts: 102
- Joined: Sun Jun 06, 2010 8:42 pm
- Location: Kasota, Minnesota
Re: P pump block
by Philip » Thu Oct 25, 2012 5:49 am
Blocks are the same.
The heads are the same other than a p-pump head does not have the holes drilled or taped for 1st gen throttle linkage mounting. The IC heads I mean. The nonIC heads are different.
The heads are the same other than a p-pump head does not have the holes drilled or taped for 1st gen throttle linkage mounting. The IC heads I mean. The nonIC heads are different.
93 W350 Club/cab w/duals, buckets & console, B&W flatbed, G56, 6 spd, 3:07 rears, gages, HX40/16, 4" exhaust, 6X.018 sticks, rear air ride suspension
-
Philip - 14mm rotor
- Posts: 1954
- Joined: Mon Jan 08, 2007 10:50 am
- Location: Indiana