Leaking KSB

How the engine works

Moderators: Greenleaf, KTA, BC847, Richie O

Postby SChandler » Sun Jun 01, 2008 10:38 pm

I'll dig this back up since I have an update. Went to the local Cummins part center for a couple of filters and asked about the "connecting pipe" for the pump. It wasn't listed in the parts guys book originally, but somebody had written in the Cummins part number for it. Cummins part no. 3920938, description: Pipe, Connecting, Unit price: $58.45. Don't know if this is a good price, but they have one on order for me. I went to the Bosch shop that they recommended, but the shop was closed (not open on weekends). I'll have to try to make it by there this week and ask them about it.
1992 W250, 300k, Getrag, BHAF, 4" exhaust, DDP fuel pin, Isspro gauges, +3 on the fuel screw, 3200rpm gov. spring, 16cm^2 housing
http://s230.photobucket.com/albums/ee261/dieselsam250/
User avatar
SChandler
fuel screw!!!!
 
Posts: 388
Joined: Thu Mar 15, 2007 12:41 pm
Location: Portland, OR

Postby SChandler » Mon Jun 02, 2008 1:57 pm

Called the Bosch shop this morning. They sold theirs a few days ago, so they are ordering one for me. $41 from the Bosch shop and supposed to be here in 5 days. Once I get it, I'll post the part number.
1992 W250, 300k, Getrag, BHAF, 4" exhaust, DDP fuel pin, Isspro gauges, +3 on the fuel screw, 3200rpm gov. spring, 16cm^2 housing
http://s230.photobucket.com/albums/ee261/dieselsam250/
User avatar
SChandler
fuel screw!!!!
 
Posts: 388
Joined: Thu Mar 15, 2007 12:41 pm
Location: Portland, OR

Postby PToombs » Mon Jun 02, 2008 5:25 pm

The Bosch shop sold theirs to the Cummins place! :shock:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11369
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby SChandler » Tue Jun 03, 2008 8:12 am

Probably :roll: . According to the parts guy, Cummins NW was supposed to have received one on 5/29 (two days before I got there) but it didn't show up. Maybe the Bosch place got to it first?
1992 W250, 300k, Getrag, BHAF, 4" exhaust, DDP fuel pin, Isspro gauges, +3 on the fuel screw, 3200rpm gov. spring, 16cm^2 housing
http://s230.photobucket.com/albums/ee261/dieselsam250/
User avatar
SChandler
fuel screw!!!!
 
Posts: 388
Joined: Thu Mar 15, 2007 12:41 pm
Location: Portland, OR
Top

Postby SChandler » Thu Jun 12, 2008 8:16 am

The Bosch part #'s for my 92:
1-460-793-3920 KSB Pipe
1-460-225-082 O-ring (Need 3, 2 of the 3 can be seen here in CK's post, the 3rd ring goes just to the right of the threads: http://www.1stgen.org/viewtopic.php?t=2349&postdays=0&postorder=asc&start=45)
1-460-210-325 O-ring, the small o-ring that goes on the left end of the big piece in CK's picture.

I don't think I needed to replace the o-rings, but I figured since I had it apart I would go ahead and replace them. Easier to do it once. I needed a 9mm open end wrench and a 10mm crow foot wrench, 3" extension and ratchet to get the ksb pipe (connecting tube) off. It's nice to not be leaking $4.70/gal fuel any more whenever the engine is running. :)
1992 W250, 300k, Getrag, BHAF, 4" exhaust, DDP fuel pin, Isspro gauges, +3 on the fuel screw, 3200rpm gov. spring, 16cm^2 housing
http://s230.photobucket.com/albums/ee261/dieselsam250/
User avatar
SChandler
fuel screw!!!!
 
Posts: 388
Joined: Thu Mar 15, 2007 12:41 pm
Location: Portland, OR
Top

Postby PToombs » Thu Jun 12, 2008 5:55 pm

Wow, only 4.70 there? :shock: It dropped to 4.99 here, was 5.09 most places.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11369
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby SChandler » Thu Jun 12, 2008 9:36 pm

PToombs wrote:Wow, only 4.70 there? :shock: It dropped to 4.99 here, was 5.09 most places.


Yeah, it was "only" $4.679 at the Flying J last night when I fueled up. It went down :cheers: a week or two ago. Most every other place charges $4.80 or more a gallon though. Still about $0.60/gal more than regular unleaded :mad: . I got to work yesterday and thought "Somethings missing." Then I realized that the cab didn't smell like diesel fuel anymore :lol: . Guess I should have fixed that leak sooner.
1992 W250, 300k, Getrag, BHAF, 4" exhaust, DDP fuel pin, Isspro gauges, +3 on the fuel screw, 3200rpm gov. spring, 16cm^2 housing
http://s230.photobucket.com/albums/ee261/dieselsam250/
User avatar
SChandler
fuel screw!!!!
 
Posts: 388
Joined: Thu Mar 15, 2007 12:41 pm
Location: Portland, OR
Top

Previous

Return to Engine

Who is online

Users browsing this forum: No registered users and 16 guests

cron