bhaf wanted

How the engine works

Moderators: Greenleaf, KTA, BC847, Richie O

bhaf wanted

Postby 93cummins89 » Sat Jul 25, 2015 11:24 am

any one got any advice on how to put in a bhaf and what to use
93cummins89
fuel screw!!!!
 
Posts: 91
Joined: Sat Apr 18, 2015 9:30 pm
Location: Central ohio

Re: bhaf wanted

Postby RumbleFish » Sat Jul 25, 2015 1:22 pm

Wix 42790 is the filter everybody uses.
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana

Re: bhaf wanted

Postby RCCUMMINS89 » Sat Jul 25, 2015 1:23 pm

BHAF, 5 t-bolt clamps ,2 45 degree elbows, 16" piece of 4" exhaust pipe, and a 3" piece of 4" exhaust pipe, and then a clamp or mount of some sort. I'm not posting the next link for advertising, but more for you to see what it involves in the picture.

http://thehungrydiesel.com/BHAF-Intake- ... intake.htm
Last edited by RCCUMMINS89 on Sun Jul 26, 2015 11:37 pm, edited 1 time in total.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: bhaf wanted

Postby jethro » Sun Jul 26, 2015 11:25 pm

I just got a version from NAPA-
4 inch inside the rubber endpiece-
I am going to try using silicone SCAT hose - which is a 2 layer of fiberglass impregnated silicone with a steel wire spring
molded between the layers. Used in aircraft for carb heat air and hot or cold air ducts. 4 inch is about 15$ a foot.
I think 3 feet should do it ! It bends easily but doesn't collapse easily because of the wire. Rated to 500F.
get at aircraft spruce, wicks, chief aircraft supply, airparts, ect.
Going to try to build an aluminum box of some kind fro a filter housing. Not sure yet where to go with the inlet.....

Tim
jethro
fuel screw!!!!
 
Posts: 432
Joined: Sat Mar 08, 2014 12:32 am
Top

Re: bhaf wanted

Postby 93cummins89 » Mon Jul 27, 2015 4:18 pm

sweet thanks guys
93cummins89
fuel screw!!!!
 
Posts: 91
Joined: Sat Apr 18, 2015 9:30 pm
Location: Central ohio
Top

Re: bhaf wanted

Postby RumbleFish » Tue Jul 28, 2015 8:23 am

If youre going to napa then youll want a 2790
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: bhaf wanted

Postby CumminsPower59 » Tue Jul 28, 2015 8:50 am

Damn, those things have gotten stupid expensive. $98 from Napa and $86 from Oreilly's.

I think I paid $65 for mine...but that's been a few years ago...but I think it's a Donaldson...
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: bhaf wanted

Postby CumminsPower59 » Tue Jul 28, 2015 8:55 am

If you can buy online, I would try checking all the part numbers...I found some as low as $60 shipped.


I did some digging anyways...

Technical specs for the regular one...
https://catalog.donaldson.com/productDe ... 504#tabs-2


Seen this too, kinda nifty and it has a high CFM like the standard BHAF...

https://catalog.donaldson.com/productDe ... uId=s63522

Although long...one could very well make a cold air intake off of it somehow...and its just about the same price, at around $85-90.
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: bhaf wanted

Postby RCCUMMINS89 » Tue Jul 28, 2015 9:43 am

CumminsPower59 wrote:Damn, those things have gotten stupid expensive. $98 from Napa and $86 from Oreilly's.

I think I paid $65 for mine...but that's been a few years ago...but I think it's a Donaldson...




You can buy them online for about $56 ;)
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: bhaf wanted

Postby CumminsPower59 » Tue Jul 28, 2015 10:23 am

I looked and couldn't find much less with shipping added for less than what I posted...



Geeze, I'm batting .000 today :?
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: bhaf wanted

Postby RCCUMMINS89 » Tue Jul 28, 2015 11:04 am

We're $61.99 shipped on the site, Ike.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: bhaf wanted

Postby CumminsPower59 » Tue Jul 28, 2015 1:29 pm

Well, fooey! :oops:

That's a pretty good deal my friend 8)
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: bhaf wanted

Postby 93cummins89 » Tue Jul 28, 2015 3:35 pm

why not just a john deere or semi truck filter?
93cummins89
fuel screw!!!!
 
Posts: 91
Joined: Sat Apr 18, 2015 9:30 pm
Location: Central ohio
Top


Return to Engine

Who is online

Users browsing this forum: No registered users and 15 guests