2015 BS and Chat Thread!

[ellis93]

This one time in Mobile Alabama I was in a traffic jam and some bums were circling like buzzards with squirt bottles of nasty water and filthy news papers cleaning glass....trying to make a living is one thing but they were leaning on people's cars and shouting obscenities when told to go on. I wasn't having them talk like that around my kid (the girl was in there) so I whipped that thing out and plopped it on the dash...I swear the bumm coming toward the truck levitated for a second and spun around

Ellis, a couple buddies were in NYC for something and the bums were cleaning windows at a stoplight, and the guy driving put his 9mm up on the dash like you did. He said nobody came near the car after that.

And clean your hands you dirtbag!

I can't clean them....I ran out of 60 grit sand paper. That's about the only way they come clean,that or I go on vacation and do nothing for a week

[ellis93]

44mag that's funny.
500s&w baby

Pistols, not hand cannons

Those 500s scare me, but given the chance, I'd shoot one. One of dad's friends slays deer with a 460.

Man that thing will dig a trench those 460's are fun. I had the opportunity to shoot one at a meet and great range day and I like to have shot all that dudes bullets up. No one else would shoot it so I did.

[diesel freak01]

Those noe molds are nice. I have heard a lot of good things about them. I would like to have a 62 grain mold for both ar and my bolt gun.

[Promod631]

Got a chance to shoot a 454 casual and missed the gopher we shot at but blew a hole next to him

[cmann250]

Got a chance to shoot a 454 casual and missed the gopher we shot at but blew a hole next to him

I bet he got the message

Ellis, come to think of it a friend of mine had/has a single shot 500 like you have. He once gave short warning and cracked one off in a confined space. I don't think any of us could hear correctly for the rest of the day.

[ellis93]

Those noe molds are nice. I have heard a lot of good things about them. I would like to have a 62 grain mold for both ar and my bolt gun.

What's the twist on your barrels? The upper I just bought is 1 in 7 so I want a heavy bullet to take advantage of the slow spin. Plus I think it'll add some punch. I did see an 80gn too lol

[ellis93]

Got a chance to shoot a 454 casual and missed the gopher we shot at but blew a hole next to him

I bet he got the message

Ellis, come to think of it a friend of mine had/has a single shot 500 like you have. He once gave short warning and cracked one off in a confined space. I don't think any of us could hear correctly for the rest of the day.

Man I know it. First time I was around one I was sitting near by on a bench at the firing line and a retard buddy of mine had one. He stood up and stepped back from the table,putting the muzzle about even with my head.....I'm still about 20' away. He lets loose and it felt like I got slapped in the head with a night stick. I'm lucky I had my muffs on or I'm sure my left ear would have bled.
That also the same rifle I have now too

[DMan1198]

Welp I spent close to an hour editing a tune for a 4th gen owner that having issues spooling his gtx4202r. It won't spool as good as mine with its 80 at half throttle. Stock sticks were yielding 4psi. 100% overs put him at 5-6 at 50% (mine does 8-10) so I offered to send him something like what I run. Then got looking at all the codes h&s shuts off on these things to get around the missing bits, so now I've asked for the tune from his truck. That'll save me a lot of time. Especially on the trans since I don't know who's built it or what they like for ramp rates, and all those little things

[RCCUMMINS89]

Just remember Ducati..... I do care (just cuz they will be like, uh huh what?)

[diesel freak01]

Those noe molds are nice. I have heard a lot of good things about them. I would like to have a 62 grain mold for both ar and my bolt gun.

What's the twist on your barrels? The upper I just bought is 1 in 7 so I want a heavy bullet to take advantage of the slow spin. Plus I think it'll add some punch. I did see an 80gn too lol

Pretty sure mine are 1 in 9 but won't swear to it. Been too long since I built them. The bolt gun is 1 in 7 so it will handle a heavier bullet. I need to get a powder coat gun for the smaller bullets. My first try I was just doing a dry shake. Worked pretty good after I got the hang of it.

[DMan1198]

Thanks Eric

[ellis93]

Those noe molds are nice. I have heard a lot of good things about them. I would like to have a 62 grain mold for both ar and my bolt gun.

What's the twist on your barrels? The upper I just bought is 1 in 7 so I want a heavy bullet to take advantage of the slow spin. Plus I think it'll add some punch. I did see an 80gn too lol

Pretty sure mine are 1 in 9 but won't swear to it. Been too long since I built them. The bolt gun is 1 in 7 so it will handle a heavier bullet. I need to get a powder coat gun for the smaller bullets. My first try I was just doing a dry shake. Worked pretty good after I got the hang of it.

I use airsoft BBs and a small amount of powder in a Rubbermaid container. Say about 500 or so BB's and about two teaspoons of powder. I get ok results,mostly a small amount of speckling,looks like fish eye. Absolutely they get shot

Powder wise I've been mostly stuck with harbor freight stuff and only the red is worth a dang. I can't get full coverage with the yellow....I do sprinkle a little over the tips of bullets meant for full house loads.

[ellis93]

Welp I spent close to an hour editing a tune for a 4th gen owner that having issues spooling his gtx4202r. It won't spool as good as mine with its 80 at half throttle. Stock sticks were yielding 4psi. 100% overs put him at 5-6 at 50% (mine does 8-10) so I offered to send him something like what I run. Then got looking at all the codes h&s shuts off on these things to get around the missing bits, so now I've asked for the tune from his truck. That'll save me a lot of time. Especially on the trans since I don't know who's built it or what they like for ramp rates, and all those little things

I have no idea what your talking about but it sounds tedious.....I think I'd hate it.

[cmann250]

Thanks Eric

I'd like to learn EFIlive sometime. I doubt I'll ever have an EFIlive compatible vehicle, but I have a few friends with DMaxes. They bug me saying its not running right and I'm like what's EFIlive say? "Oh I don't know". Why'd you buy the software then?

I think it's a fantastic diagnostic and tuning system, but I doubt I'll ever personally need it. I hope not at least

[DMan1198]

It's pretty easy to learn. Mostly just takes time