New toy

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

New toy

Postby skilletky » Sat Apr 28, 2012 3:45 pm

Got me a new boom stick. I've wanted one of these things forever. Traded some tools for it. Have not got to shoot it yet. Can't wait to. Had to do a little work and a lot of cleaning on it.

Image

Only bad part is ammo is expensive for it and kinda hard to come by.
92 d350, arp's, orings, 150lb springs, 4200 gsk ,ground pin ,64/71/14 ,ddp inj's, ats manifold, tim's tubez, ats trans, FASS, locker, timing + a tooth, bcdd intake

2001 2wd rclb dually 5sp, smarty, Bluechip FMS, TS MVP, 57/75 twins, stainless diesel pipe kit, valair clutch, airdog 150, DFI SAC 7x.014's, cheap a$$ intake, ARP studs, oringed head, CPP 115# springs
User avatar
skilletky
14mm rotor
 
Posts: 1070
Joined: Thu Jan 10, 2008 5:49 pm
Location: northern ky

Re: New toy

Postby PToombs » Sat Apr 28, 2012 5:53 pm

I think somebody is screwing you on the ammo. All that red is is a little nail polish. Regular ammo will work. :mrgreen:

What is that anyways?
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!

Re: New toy

Postby ellis93 » Sat Apr 28, 2012 6:05 pm

45,30/30......?
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: New toy

Postby skilletky » Sat Apr 28, 2012 7:14 pm

It's a marlin 1895s, 45-70. Those are horniday bullets and are cheaper than the regular old 45-70.
92 d350, arp's, orings, 150lb springs, 4200 gsk ,ground pin ,64/71/14 ,ddp inj's, ats manifold, tim's tubez, ats trans, FASS, locker, timing + a tooth, bcdd intake

2001 2wd rclb dually 5sp, smarty, Bluechip FMS, TS MVP, 57/75 twins, stainless diesel pipe kit, valair clutch, airdog 150, DFI SAC 7x.014's, cheap a$$ intake, ARP studs, oringed head, CPP 115# springs
User avatar
skilletky
14mm rotor
 
Posts: 1070
Joined: Thu Jan 10, 2008 5:49 pm
Location: northern ky
Top

Re: New toy

Postby skilletky » Sat Apr 28, 2012 7:16 pm

The red is rubber. That way you can load pointed tip ammo in a lever action and not blow the gun up
92 d350, arp's, orings, 150lb springs, 4200 gsk ,ground pin ,64/71/14 ,ddp inj's, ats manifold, tim's tubez, ats trans, FASS, locker, timing + a tooth, bcdd intake

2001 2wd rclb dually 5sp, smarty, Bluechip FMS, TS MVP, 57/75 twins, stainless diesel pipe kit, valair clutch, airdog 150, DFI SAC 7x.014's, cheap a$$ intake, ARP studs, oringed head, CPP 115# springs
User avatar
skilletky
14mm rotor
 
Posts: 1070
Joined: Thu Jan 10, 2008 5:49 pm
Location: northern ky
Top

Re: New toy

Postby PJ 3 » Sat Apr 28, 2012 7:27 pm

It should rub your shoulder a bit after a few rounds.......what kind of critters are ya gonna knock down with a cannon like that ?
Pete

1992 W250
User avatar
PJ 3
fuel screw!!!!
 
Posts: 220
Joined: Mon May 18, 2009 4:38 pm
Location: New Brunswick, Canada
Top

Re: New toy

Postby skilletky » Sat Apr 28, 2012 8:14 pm

I mainly got it for camping at the red river gorge. There is bears and large cats down there.
92 d350, arp's, orings, 150lb springs, 4200 gsk ,ground pin ,64/71/14 ,ddp inj's, ats manifold, tim's tubez, ats trans, FASS, locker, timing + a tooth, bcdd intake

2001 2wd rclb dually 5sp, smarty, Bluechip FMS, TS MVP, 57/75 twins, stainless diesel pipe kit, valair clutch, airdog 150, DFI SAC 7x.014's, cheap a$$ intake, ARP studs, oringed head, CPP 115# springs
User avatar
skilletky
14mm rotor
 
Posts: 1070
Joined: Thu Jan 10, 2008 5:49 pm
Location: northern ky
Top

Re: New toy

Postby oldestof11 » Sun Apr 29, 2012 7:25 am

NICE!

I had a Marlin 30/30. Sadly I sold it a couple years ago when I was in a financial bind. :(
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: New toy

Postby cougar » Sun Apr 29, 2012 8:13 am

I liked my 45-70, loaded it with 405gr flat nose reloads. But I had to trade it in on a 458 win mag.
RIP 91.5 W250 5 speed. The great experiment.
92 W250 HD 47RH with Compushift. Upgraded H1C to 62/60/16, Scheid Lightning VE, 60# valve springs, DAP 7X.010 injectors, 4" DE exhaust, home made cooler tubes.
01 2500 "the work truck".
cougar
14mm rotor
 
Posts: 961
Joined: Sat Apr 18, 2009 3:31 pm
Location: The Valley of no concern, AK
Top

Re: New toy

Postby skilletky » Sun Apr 29, 2012 8:25 am

I could never sell a gun. The more the better. I am gomna buy some reloading dyes and load me up some. I need to get my shot shell reloaded out and start lOading. I think my dad just got a 458 win mag. I honestly never seen one. He has about 15 guns in some crazy a$$ calibers that I ain't never heard of and he ain't shot a one of them.
92 d350, arp's, orings, 150lb springs, 4200 gsk ,ground pin ,64/71/14 ,ddp inj's, ats manifold, tim's tubez, ats trans, FASS, locker, timing + a tooth, bcdd intake

2001 2wd rclb dually 5sp, smarty, Bluechip FMS, TS MVP, 57/75 twins, stainless diesel pipe kit, valair clutch, airdog 150, DFI SAC 7x.014's, cheap a$$ intake, ARP studs, oringed head, CPP 115# springs
User avatar
skilletky
14mm rotor
 
Posts: 1070
Joined: Thu Jan 10, 2008 5:49 pm
Location: northern ky
Top

Re: New toy

Postby 1arock » Sun Apr 29, 2012 12:29 pm

Big old cannon like that might kill in both ends. I shot a 458 win mag "1 TIME". Rocky
92W250 w/a 68D100 skin,tach, pyro, boost, trans temp guages, rebuilt a518 w/a PTC converter, 4in muffeled exhaust, 3200 gov spring, he351cw,M@H dynamic timing, 5x12s,M@H M3 pin, pump jacked with, 3.54s, 6+ lift, 14.5x36r rubber,nearly done,"What was I thinking?"
User avatar
1arock
fuel screw!!!!
 
Posts: 107
Joined: Thu Feb 03, 2011 1:49 pm
Location: Scott City MO
Top

Re: New toy

Postby 1STGENFARMBOY » Sun Apr 29, 2012 7:10 pm

My step-bro has a break down 45-70 single, thing hits like mike tyson. :shock:

but i would rather be on the but end than the other choice. :lol:
93 W250 STD CAB, AUTO 3.55, GAUGES, 80HP DDP STICKS, DENNY T ,16CM HOUSING, 60MM GILLETT, VE MAXED,BHAF, BHFF, 366 SPRING,P/S INTERCOOLER, TIMS COOLER TUBS, TIMMING 1/8 BUMP,4in TURBO BACK TO DUEL 5IN STACKS,33 12.50 BFG, HOLLEY BLACK, CONVERTER COOMING.
User avatar
1STGENFARMBOY
14mm rotor
 
Posts: 2089
Joined: Mon Sep 28, 2009 2:23 pm
Location: PITTSBURG ILL
Top

Re: New toy

Postby skilletky » Sun Apr 29, 2012 7:10 pm

Yeah, it will probably thump me pretty good. I had a chance to shoot a 50 cal bolt action rifle when I was younger. My dad wouldn't let me :-( my dad shot it with the muzzle break on a few times. He only shot it once with it off. It about knocked him of the bench.
92 d350, arp's, orings, 150lb springs, 4200 gsk ,ground pin ,64/71/14 ,ddp inj's, ats manifold, tim's tubez, ats trans, FASS, locker, timing + a tooth, bcdd intake

2001 2wd rclb dually 5sp, smarty, Bluechip FMS, TS MVP, 57/75 twins, stainless diesel pipe kit, valair clutch, airdog 150, DFI SAC 7x.014's, cheap a$$ intake, ARP studs, oringed head, CPP 115# springs
User avatar
skilletky
14mm rotor
 
Posts: 1070
Joined: Thu Jan 10, 2008 5:49 pm
Location: northern ky
Top

Re: New toy

Postby tampabayBill » Mon Apr 30, 2012 8:06 am

Got one of those myself, mines the guide model with the shorter ported barrel. Packs a wallop on both ends !! Sight it in 2in. high at 100 and it will hit in an 8in. circle out to 300 yrds using those Hornady tipped slugs.
93D250 CC LE, 62/65/13 S300, PDR cam,DDP3's, B&D IP, 366 GSK, M3 & timing device, Air Dog 150, Cooler tubes, 3 piece manifold, BHAF & 4" tbe, ported & O ringed, ARP studs, 60# springs 47RH & 3 disc conv., fp, aux trans cooler, fluid damper, 3:54 D70 w/trac-lok, rear sway bar, gauges = egt,boost, tach, 47RH & diff. temps.
Twins coming soon!
tampabayBill
fuel screw!!!!
 
Posts: 293
Joined: Sat Oct 09, 2010 7:51 am
Location: New Port Richey, Fla.
Top

Re: New toy

Postby CAJUN 93 » Mon Apr 30, 2012 8:13 am

I cast and load for 45-70. used wheel weights cast 340 grain and 405 grain. much cheaper than store bought. makes the same whole in deer as the store bought stuff. they end up just as dead :lol: . also cast and load 38 357 9mm 45acp 30-30 and 35 remington. i'm a lever action junky. hunting for a nice 38-55 now.

daryl

Image
Image
Image
Image
93 d350 5spd 3.54-bhaf,stg iv,banks intercooler,bosch185,16cm,pacbrake,4" straight exh,pump mods,366 spring,leece-neville alt.
hers- 93 d250 auto 3.54- pump mods only
ours- 93 w350 dually, auto, 3.54. stock for now
parts 93 d350 auto, 92 d250 auto.
User avatar
CAJUN 93
14mm rotor
 
Posts: 545
Joined: Tue Jan 09, 2007 9:53 am
Location: southeast luziana
Top

Next

Return to Lounge

Who is online

Users browsing this forum: No registered users and 58 guests