Okay, it's a Samson truck, between 1919 and 1922, have not looked for a number on it yet. It is a GM product, they introduced the Samson tractor and truck built in Janesville Wisconsin, the tractor was an effort to compete with the Fordson, but it sucked so badly that they shut down production of both after 3 or 4 model years. The truck is alleged to have been more successful than the tractor. It's the 1-1/2 ton model, mainly Chevrolet components, uses a Chevy model "490" engine and a three speed trans., no electrics on this one but a starter and lights were optional. My modus operundi with a piece like this is a "restorvation", I like to get them running right but preserve as much of the original, or at least old, finish as I can. If the next guy wants to do a full-on restoration that's up to him. I do show some stuff at the two big antique shows in NE. The tank doesn't really fit the truck, it will go down the road and be replaced with a flatbed or a grain box if I can find one. The truck drove into storage about 40 years ago, now it's dry stuck and missing the carb and the points cover on the mag. Pretty sure I have a Chevy car with the same engine that will run for donor parts as the car is pretty rough. I don't think it will be too bad getting it going, the wheels are what's got me nervous. It really needs two of 'em re-wooded and the Amish wheelwrights are about the only ones I know of doing quality work, they aren't in a hurry and they often like big numbers on the bill!
I'm really more into model T Fords but this surfaced and I had to have it. It was stored in an abandoned Navy ammunition factory that was many square miles and hundreds of buildings, what is left has been turned into a couple big industrial businesses and a BUNCH of storage, there is all kinds of sweet trash out there but you will never see it unless you have a reason to be there.
Will try to get some more pics later.