BOOOOOO!!!!!!!

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

BOOOOOO!!!!!!!

Postby Tacoclaw » Tue Jul 09, 2013 8:58 pm

FWIW, I have no idea about injectors or their internals, just hassling RC since he was so worried. Keeping him on his toes. ;)
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH

Re: BOOOOOO!!!!!!!

Postby RCCUMMINS89 » Tue Jul 09, 2013 9:13 pm

Let's not get out of line again..........as BC's job is hard enough and he does a great job.


It's easy to get me riled up on the injector deal......I'm as hard headed as it gets and will fight my opinions until it's a lost cost, and then have another thing to say.

No hard feelings though, as it is important that without discussions/debates/arguments good things don't come out and thoughts are never challenged
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID

Re: BOOOOOO!!!!!!!

Postby Tacoclaw » Wed Jul 10, 2013 8:04 am

I'm still gonna stand by my thought that it will be impossible to make any real comparison until you confirm that the injectors are the same in every way beside the # of holes.

Too many other variables to make a claim otherwise.

Is it easier to switch to a set of 5-holders that may be better or may just have a better spray angle or pop pressure?

Yup.


Easiest $600 you'll ever spend. ;)
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: BOOOOOO!!!!!!!

Postby Mark Nixon » Wed Jul 10, 2013 8:18 am

I tried to access the "Admins" topic and got the "You are not authorised to read this forum." notice. :?
Did you guys go overboard on opinions, again? :lol:

Mark.
Mark Nixon
 
Top

Re: BOOOOOO!!!!!!!

Postby Tacoclaw » Wed Jul 10, 2013 8:34 am

I thought we were pretty civil, though I did get called 'worthless".


The investigation continues. :mrgreen:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: BOOOOOO!!!!!!!

Postby ellis93 » Wed Jul 10, 2013 8:38 am

Tacoclaw wrote:I thought we were pretty civil, though I did get called 'worthless".


The investigation continues. :mrgreen:

Sadly I missed all that :(

Somebody fill me in did Eric like the finger smile or not :lol:
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: BOOOOOO!!!!!!!

Postby Mark Nixon » Wed Jul 10, 2013 8:43 am

Tacoclaw wrote:I thought we were pretty civil, though I did get called 'worthless".

You should be used to that by now? :P
Just ribbing ya', man. :lol:

Mark.
Mark Nixon
 
Top

Re: BOOOOOO!!!!!!!

Postby Tacoclaw » Wed Jul 10, 2013 9:27 am

Unless worthless is French for gay, I can't say I've been called that in quite a while. I doubt that though, Pete and Hiney call me gay constantly, no doubt trying some sort of psychological torture to turn me to their ways. Considering their orientation it's common sense that they would know French. :mrgreen:

However, with this being the Internet and all even the biggest knockdown drag out will probably be forgotten within a week. That's the cool thing about the Internet is it's a lot easier to forgive a screen name arguing with you than a person your sitting across from calling you an idiot. :lol:

My truck on the other hand, it gets called worthless every time I see my pyro start wildly flying around. (Every day for the last two weeks). :puke:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: BOOOOOO!!!!!!!

Postby AHineman » Wed Jul 10, 2013 9:34 am

Levi, you're just bi-courious. :P
Andrew

Owner of two old 1stgens and not much else.
AHineman
14mm rotor
 
Posts: 1364
Joined: Tue Aug 11, 2009 7:15 pm
Location: Crown City, Ohio
Top

Re: BOOOOOO!!!!!!!

Postby RCCUMMINS89 » Wed Jul 10, 2013 9:38 am

quit drinking i said you are hopeless holy crap
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: BOOOOOO!!!!!!!

Postby AHineman » Wed Jul 10, 2013 9:39 am

:lol:
Andrew

Owner of two old 1stgens and not much else.
AHineman
14mm rotor
 
Posts: 1364
Joined: Tue Aug 11, 2009 7:15 pm
Location: Crown City, Ohio
Top

Re: BOOOOOO!!!!!!!

Postby Tacoclaw » Wed Jul 10, 2013 9:43 am

I wish I could, but I was driven back to drinking by a recent injector thread. :cry:

Now to wait until 6pm-6:05pm to see what Pete has to say. :lol:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: BOOOOOO!!!!!!!

Postby AHineman » Wed Jul 10, 2013 9:46 am

I'm pretty sure an injector thread will start a fight faster than one about politics. :shock:
Andrew

Owner of two old 1stgens and not much else.
AHineman
14mm rotor
 
Posts: 1364
Joined: Tue Aug 11, 2009 7:15 pm
Location: Crown City, Ohio
Top

Re: BOOOOOO!!!!!!!

Postby Mark Nixon » Wed Jul 10, 2013 9:59 am

AHineman wrote:I'm pretty sure an injector thread will start a fight faster than one about politics. :shock:

Yeah, but unlike an injector thread, which has no life-changing facts, a political one can be informative about what those snaky liberal politicians and their whiney-butt minions are willing and able to do to take our rights away.

Some, who prefer to put their head in the sand, might not think it's a big deal, but most of us have the sense to understand that it DOES MATTER.

Uh, just what were we bitching about again? :lol:

Mark.
Mark Nixon
 
Top

Re: BOOOOOO!!!!!!!

Postby Tacoclaw » Wed Jul 10, 2013 10:06 am

Much like injector threads, the majority of political threads are based mostly on hearsay and assumptions.

The only difference is I don't have to read a bunch of stupid, obviously fake chain-email stuff in injector threads. :lol:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Next

Return to Lounge

Who is online

Users browsing this forum: No registered users and 15 guests