What's more efficient than a turbo?

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

What's more efficient than a turbo?

Postby gman07 » Mon Nov 12, 2007 1:22 pm

Why, bypassing the turbo, of course! http://www.gmmodernmuscle.com/forums/vi ... sc&start=0

Someone finally figured out a zero emissions, unlimited power engine :lol:
1992.5 W250 pump tweaked, straight pipe, gauges, 3200 Gov. spring, AFC lever partially ground, timed at 1/8", Fuel pin ground, BHAF, HTT Stage IV H1C/E 60/12wg (ported), Transgo shift kit, KDP clothes-hangered, 202,000 miles - 36psi, 1250°
gman07
fuel screw!!!!
 
Posts: 81
Joined: Sun Jan 07, 2007 10:06 pm
Location: The "nose" of Iowa

Postby TWorline » Mon Nov 12, 2007 4:58 pm

gman07:

Thanks for the laugh!!! :jumpsmile: :jumpsmile: :jumpsmile: :jumpsmile: :jumpsmile:
That thread srtarted 11/07/07 and had 172000 views at 6:40pm today!
Tim Worline
1992 W250 Club Cab LE, S300 62/71, 5" stainless intake, 4" into 5" exhaust, ATS exhaust manifold, SDX 5X18 Injectors, AirDog 150, Borgeson shaft, Coolingmist Vari-cool, Con OFEK, 3" Stainless CoolerTubz, 354/749.

http://www.CoolerTubz.com/
User avatar
TWorline
14mm rotor
 
Posts: 2480
Joined: Thu Jan 04, 2007 6:32 pm
Location: Continental, Oh.

Postby oldcool90 » Mon Nov 12, 2007 5:54 pm

That is some funny stuff right their :lol: :lol:
1992 reg cab W-350 5sp 12cm ex housing,pod's,3200rpm gov,and piston lift pump
oldcool90
fuel screw!!!!
 
Posts: 164
Joined: Sun Jun 03, 2007 1:50 pm
Location: terre haute In.
Top

Postby PToombs » Mon Nov 12, 2007 6:36 pm

I bet that dummy never posts again on there. He's only been a member for a month! :lol:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby cummins king » Mon Nov 12, 2007 7:19 pm

hey the link doesn't work
93 4X4 auto
User avatar
cummins king
14mm rotor
 
Posts: 1741
Joined: Wed Aug 01, 2007 5:35 pm
Location: oakville, ontario, canada
Top

Postby flashgordon » Mon Nov 12, 2007 8:19 pm

cummins king wrote:hey the link doesn't work


It worked for me.


O :rendeer: man my gut still hurts :lol:

I just had to read all 5 pages of that post.
theres nothing wrong with thing out of the box but, :scratch: OMG :lol: :lol: :lol:


Flash
91.0 non intercooled 3/4 ton 5sd ex.straight piped 16cm housing, timing bumped 1/16...Pump . Full power screw1/2 max with out removing the collar. Gear Vender over drive!
"NOW" with 2nt gen intercooler, turbo and 3"Coolertubz, Buy Tim (TWorline)"
flashgordon
fuel screw!!!!
 
Posts: 280
Joined: Sun Jan 07, 2007 8:50 pm
Location: Evanston Wy
Top

Postby PToombs » Tue Nov 13, 2007 6:24 pm

I didn't read it all, did he do it? :shock:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby cummins king » Tue Nov 13, 2007 6:47 pm

forgive me while i wipe the tears out of my eyes, there is NO words to discripe that, i think im going to register to that forum just to laugh at that guy :hs: :jumpsmile:
what a dummy
93 4X4 auto
User avatar
cummins king
14mm rotor
 
Posts: 1741
Joined: Wed Aug 01, 2007 5:35 pm
Location: oakville, ontario, canada
Top

Postby flashgordon » Tue Nov 13, 2007 7:18 pm

PToombs wrote:I didn't read it all, did he do it? :shock:



On the last page they start to believe it was a 14 year old kid.........but if it really was and adult, HE HAS MORE THEN A COUPLE screws loose...........He may only have one left, and i thing it's shorting out!!!!

I was reading several of them to my wife but she was having a hard time understand what i was saying thru all of the :jumpsmile: that was going on.
Sever guys felt pitty and explain why this would not work................nothing but bird chirping in the distance....he just didn't get it :bball: :bounce: :scratch: :rabbit:

I should go back and see if there is more then 5 pages now :roll: :lol:

Flash.
91.0 non intercooled 3/4 ton 5sd ex.straight piped 16cm housing, timing bumped 1/16...Pump . Full power screw1/2 max with out removing the collar. Gear Vender over drive!
"NOW" with 2nt gen intercooler, turbo and 3"Coolertubz, Buy Tim (TWorline)"
flashgordon
fuel screw!!!!
 
Posts: 280
Joined: Sun Jan 07, 2007 8:50 pm
Location: Evanston Wy
Top

Postby cummins king » Tue Nov 13, 2007 7:27 pm

oh theres 8 pages with 35 thasand veiws if im not misstaking, that guy must of put a pipe from his exaust into his wind a few to many time to heat up his car
what a :grrr:
and its on every forum iv bin to 5 in the last 20 mins and its on every one, ethier that guy was tring to be famous, witch hes accheved or he really is dum for the lack of a better word
93 4X4 auto
User avatar
cummins king
14mm rotor
 
Posts: 1741
Joined: Wed Aug 01, 2007 5:35 pm
Location: oakville, ontario, canada
Top

Postby PToombs » Wed Nov 14, 2007 6:14 pm

He's going to have to work hard to beat the "Herculiner on my Hootus" thread on that 4x4 site!
:jumpsmile:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby flashgordon » Wed Nov 14, 2007 6:19 pm

I think they lock the thread. becouse there hasn't been a post since last night at this time.


Flash.
91.0 non intercooled 3/4 ton 5sd ex.straight piped 16cm housing, timing bumped 1/16...Pump . Full power screw1/2 max with out removing the collar. Gear Vender over drive!
"NOW" with 2nt gen intercooler, turbo and 3"Coolertubz, Buy Tim (TWorline)"
flashgordon
fuel screw!!!!
 
Posts: 280
Joined: Sun Jan 07, 2007 8:50 pm
Location: Evanston Wy
Top

Postby TWorline » Wed Nov 14, 2007 7:06 pm

367,321 views at 9:00pm Wednesday that is 195,321 views since my post on Monday night!!! There is alot of people that knows he is nuts!!! :lol:
Tim Worline
1992 W250 Club Cab LE, S300 62/71, 5" stainless intake, 4" into 5" exhaust, ATS exhaust manifold, SDX 5X18 Injectors, AirDog 150, Borgeson shaft, Coolingmist Vari-cool, Con OFEK, 3" Stainless CoolerTubz, 354/749.

http://www.CoolerTubz.com/
User avatar
TWorline
14mm rotor
 
Posts: 2480
Joined: Thu Jan 04, 2007 6:32 pm
Location: Continental, Oh.
Top

Postby cummins king » Wed Nov 14, 2007 7:42 pm

whos that Herculiner on my Hootus
93 4X4 auto
User avatar
cummins king
14mm rotor
 
Posts: 1741
Joined: Wed Aug 01, 2007 5:35 pm
Location: oakville, ontario, canada
Top

Postby PToombs » Thu Nov 15, 2007 7:18 pm

CK, check this out! 13 pages of gut busting humor! :jumpsmile:

http://www.explorerforum.com/forums/sho ... genumber=1
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Next

Return to Lounge

Who is online

Users browsing this forum: No registered users and 47 guests