WTH PEOPLE

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

Re: WTH PEOPLE

Postby RCCUMMINS89 » Fri Aug 16, 2013 4:14 pm

Caleb is referring to the same thing that I noticed when I came onto the 1st gen scene. There is a select group of people that have their opinion and one feels that they can't say anything without being corrected and/or put down. This site has somewhat of an elete stature to it. Or at least he comes across that way. It is intimidating to be new. Once in the works, unless you have done something to "earn your ranks" one feels looked down upon. It's the simple way that the site has been. Nothing seemed to have changed about it. It has nothing to do with anyone in charge, all of us are to blame.

Caleb - personally............there is nothing about your words of wisdom when it comes to performance that I have ever seen different than what works. I can't think of one thing that I have ever thought "wth?" about.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID

Re: WTH PEOPLE

Postby ellis93 » Fri Aug 16, 2013 5:40 pm

Well.....I guess I guessed wrong Caleb,that's not unusual :lol: whatever

Eric I have known some to be that way but never from the constant companions this site has. He most open right up to you. First post Levi ever directed to me was basically calling me a pussy for not wanting to turn my fuel screw in and ruining my fss......yeah you did Levi don'tcrawfish on it,own it :lol: .
Now Pete....don't know how or what to say there :mrgreen:
Dar is always willing to throw out a compliment
Andy helps everyone
There's more folks that are around that help whenever they can but there's a few superstars that act like know it alls but they seldom visit anyhow....so who cares. This place will go on without their presents or bloated opinion.......

This is the only diesel site that I really visit and post the others I usually just browse thru and lookie Lou. I don't see the buttheadism that exist there...here. It ain't here ;)
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi

Re: WTH PEOPLE

Postby PToombs » Fri Aug 16, 2013 6:26 pm

I post to help if I know something about it, if I don't then I let it pass. If nobody has posted I'll offer an opinion, and then usually somebody else will try to help. I figure it's better to post something than to leave a guy hanging with an unanswered question after 24 hours.
I like to poke at people, but I try to keep it from being too serious. I enjoy it when Levi or Ellis banters back with me. I try very hard not be nasty when I'm picking on someone so they don't get mad, it's all in fun to me. If I get upset I walk away, or work it out in PMs. There's no reason to get all but hurt here. (unless you're on a date with Levi ;) )

And more lately I don't hesitate to flag a post if I think it's wrong. Before I used to gloss over it and leave it for somebody else to take care of, now I try to help to keep things in line. I know BC lets us slide on lots of crap, we need to appreciate that and try to help him all we can. A word of praise goes a long way here, most mods are under appreciated get burned out with getting the "wtf did I do?" response for policing the site. Good job Dave! 8)
And if you get dinged for something, grow up and deal with it!
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: WTH PEOPLE

Postby BC847 » Fri Aug 16, 2013 6:33 pm

Good reading, folks. :)

Just got to the coast. Let me get a drink, and decompress a little . . . . . .

. .. . . And Thanks.
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2203
Joined: Wed Jan 03, 2007 5:22 pm
Top

Re: WTH PEOPLE

Postby cmann250 » Fri Aug 16, 2013 6:38 pm

Wait until you actually meet the people. In 2 or 3 years I've met Andy, Bill, Hineman, Andrew (pulltilbroke), Pete, Philip, Jeremy, Tim (TWorline), Matt (meby), Mark, Tom (txs), Dar, and several others. All great folks in my opinion. There is a TON of knowledge in that run down.

Now if we could just get some of the other regulars to come out and play... :lol:

S.O.P. October 5 :mrgreen:
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: WTH PEOPLE

Postby AHineman » Fri Aug 16, 2013 6:39 pm

I think this site is way nicer to new people than any of the others I've been on. I hesitate to even post on Compd.... too many jerks over there.


I normally try to help when I can, though it doesn't seem to be too often. My favorite thing to do is give Levi crap, at least I'm good at that. :mrgreen:
Andrew

Owner of two old 1stgens and not much else.
AHineman
14mm rotor
 
Posts: 1364
Joined: Tue Aug 11, 2009 7:15 pm
Location: Crown City, Ohio
Top

Re: WTH PEOPLE

Postby PToombs » Fri Aug 16, 2013 6:50 pm

I'm not on compD, but I've heard if you're new they won't even bother to answer a question if you ask. What good is that? I have no interest in even going over there if they have that attitude!

Hiney, me too! :mrgreen:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: WTH PEOPLE

Postby ellis93 » Fri Aug 16, 2013 6:52 pm

Y'all know what's funny......those that left here are there :lol:

I have been scouting 8)
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: WTH PEOPLE

Postby Tacoclaw » Fri Aug 16, 2013 7:03 pm

We're only nicer because we know our search sucks. :P

It's the Internet, nothing on it is really meant to be serious. Even if it was, a day or so for the crowd to wind down and youd never know it happened anways. Always assume anything semi-offensive said to you was done in a sarcastic/humorous manner until proven otherwise.

You get out of bed every day and deal with assholes in real life. You know their being assholes because you can see it in their face. At least on the Internet you can give everyone the benefit of a doubt. Just assume they forgot their smileys. :)





Also, you're all assholes. 8)




:edit:
HA!!!! What happened to the saslohe filter? :lol:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: WTH PEOPLE

Postby DodgeFreak » Fri Aug 16, 2013 7:06 pm

Is it the s? Asshole Assholes
92 D350 Cab and Chassis. Auto stock, wiring gremlins. 330k miles
92 W250 Ext cab rotted completely out. Auto, pump maxed, 215 ppump nozzles, Denny T2 pin.
85 D350 single wheel, converted to cummins, getrag, turned up 2 turns and afc screw flush.
User avatar
DodgeFreak
14mm rotor
 
Posts: 1701
Joined: Sat May 15, 2010 8:14 pm
Location: Iowa
Top

Re: WTH PEOPLE

Postby DodgeFreak » Fri Aug 16, 2013 7:07 pm

Guess not...
92 D350 Cab and Chassis. Auto stock, wiring gremlins. 330k miles
92 W250 Ext cab rotted completely out. Auto, pump maxed, 215 ppump nozzles, Denny T2 pin.
85 D350 single wheel, converted to cummins, getrag, turned up 2 turns and afc screw flush.
User avatar
DodgeFreak
14mm rotor
 
Posts: 1701
Joined: Sat May 15, 2010 8:14 pm
Location: Iowa
Top

Re: WTH PEOPLE

Postby Tacoclaw » Fri Aug 16, 2013 7:10 pm

You capitalized the first letter, it won't catch it then either. It was the "s" doing it on those, you're right.

Asshole
saslohe
assholes
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: WTH PEOPLE

Postby ellis93 » Fri Aug 16, 2013 7:19 pm

Levi your really liking those things huh? :lol:
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: WTH PEOPLE

Postby Tacoclaw » Fri Aug 16, 2013 7:29 pm

I already told you, it's all I see around here. :mrgreen:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: WTH PEOPLE

Postby ellis93 » Fri Aug 16, 2013 7:33 pm

:lol: I'm sure your enjoying it
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

PreviousNext

Return to Lounge

Who is online

Users browsing this forum: No registered users and 31 guests