Places to buy 1st Gen Parts

Moderators: BC847, Richie O

Places to buy 1st Gen Parts

Postby SChandler » Thu Feb 26, 2009 1:42 pm

A thread containing links to sites with 1st Gen parts was suggested in the "Suggestions" section. How about we go with this format: website, parts types, whether you've used them or not. Doesn't have to be exactly that, but that should be the general idea of the post.

https://www.sourceautomotive.biz/index.php - Engine parts, 4" exhuast, cluthces - I've purchased from them and will again. If it's not listed, give them a call.

http://www.stans-headers.com/diesel.htm - full 4" exhaust - I've got their exhaust system on my 92 and would recommend them.

http://www.dynomitediesel.com/ - injectors, fuel pins, gov. spring, other parts (expanding inventory) - I am running one of their fuel pins.

http://www.neweradiesel.com/ - injectors (including custom EDM's), turbos, clutches - have not used them.

http://www.scheiddiesel.com/home_0.shtml - full line of parts - if you don't see it, call them - have not used them.
1992 W250, 300k, Getrag, BHAF, 4" exhaust, DDP fuel pin, Isspro gauges, +3 on the fuel screw, 3200rpm gov. spring, 16cm^2 housing
http://s230.photobucket.com/albums/ee261/dieselsam250/
User avatar
SChandler
fuel screw!!!!
 
Posts: 388
Joined: Thu Mar 15, 2007 12:41 pm
Location: Portland, OR

Postby Richie O » Thu Feb 26, 2009 5:49 pm

http://www.frozenboost.com/index.php?os ... ebc541a8d1 Intercoolers, boots ect. I have used.

http://airflo.com/index.html Exhaust pipes , stacks, elbows. not used.

http://dieselfuelsystems.com/ My local cummins speed shop. I have used. I bought my turbo from these guys. Also dynoed there. Very smart, ask for Corey.

I will add more when Im not cross eyed.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4051
Joined: Sat May 17, 2008 9:01 pm
Location: New England

Postby SChandler » Thu Feb 26, 2009 10:00 pm

I forgot about http://airflo.com/index.html. I have used them.

http://www.genosgarage.com/ - Dress up items, gauges, some OE replacement & hop-up parts. Have used them.
1992 W250, 300k, Getrag, BHAF, 4" exhaust, DDP fuel pin, Isspro gauges, +3 on the fuel screw, 3200rpm gov. spring, 16cm^2 housing
http://s230.photobucket.com/albums/ee261/dieselsam250/
User avatar
SChandler
fuel screw!!!!
 
Posts: 388
Joined: Thu Mar 15, 2007 12:41 pm
Location: Portland, OR
Top

Postby pulltilbroke » Thu Feb 26, 2009 10:34 pm

Heres a few I've used

http://www.pdrdiesel.com/catalog/Dodge_Cummins-1-1.html lots of first gen go fast goodies, i've used them

http://www.htturbo.com/ turbos and parts, I've use them

http://www.gillettdiesel.com/ Turbos and parts, I've used them

http://www.dieselspecialties.com/ this is my local pump shop

http://www.tbtrans.com/ good source fo Getrag parts I'v used them

http://www.inlandtruck.com/ this is my local driveline shop and thers probly one near you

http://www.hosetechniques.com/ Silicone hoses and clamps, I've used them

http://www.zbag.com/ Driveline parts, I havn't used them

http://www.kennyspullingparts.com/ Clutches, I havn't used them

http://centralpower.cummins.com/wps/portal/centralpower thisis my local cummins parts place
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top

Postby BobS » Fri Feb 27, 2009 5:28 am

Don't forget http://www.genosgarage.com/ also for filters.
BobS

Creating jobs is a byproduct of making a PROFIT!

91.5 W250 NV4500 Conversion
89 D350 Stock
92 W250 Crew Cab finally in progress
86 D150 wannabe 4BT http://4btswaps.com/
User avatar
BobS
14mm rotor
 
Posts: 639
Joined: Sat Jan 06, 2007 3:16 pm
Location: SW Pa - Greene County
Top

Postby burnt_servo » Fri Feb 27, 2009 6:17 am

www.car-part.com .... a online list of many wreckers and their inventory's .
'93 w250 .... stock ...
curently removing the dead moose parts ....
User avatar
burnt_servo
fuel screw!!!!
 
Posts: 472
Joined: Wed Dec 26, 2007 2:19 pm
Location: northern b.c. , canada
Top

Postby peobryant » Sun Mar 01, 2009 10:37 pm

www.moparpartsamerica.com has a bunch of good "stuff" for our trucks.
Parker
1991 Dodge Ram D350, Cummins Turbo Diesel, A518
1992 Dodge Ram W350, Cummins Turbo Diesel, G360
User avatar
peobryant
14mm rotor
 
Posts: 1937
Joined: Thu Dec 27, 2007 1:07 am
Location: Goshen, Ky
Top

Postby DieselSharker » Wed Aug 05, 2009 3:18 am

http://www.puredieselpower.com Lots of injectors, exhausts, gov spring, rebuilt VE pumps, turbo housings

I also highly recommend Geno's. Get all my filters from them. Most anything they don't have they will order for you. They ordered me a 4000rpm tach from Isspro.
1991 W250 727, 6" Skyjacker, 37" Dick Cepeks, Gear Vendor O/D, SDX 5x.014s, BHAF, home-made 4" intake, VE tuning & DennyT II pin, GDS 60mm with 16 cm, CoolerTubz 3" crossover
SUPPORT YOUR VETERANS!
User avatar
DieselSharker
fuel screw!!!!
 
Posts: 136
Joined: Fri Jun 05, 2009 12:42 pm
Location: Central TX
Top

Re: Places to buy 1st Gen Parts

Postby lazyjoe » Fri Feb 19, 2010 4:13 pm

93, W350, auto, DTT convertor, 4.10's, GDS 60mm with 14cm, piston l/p, 2nd gen air horn. 366 spring. boost, and pyro.
91, W250, 360 gas, auto, 4.10
95, 2500, 4/4, 5" turbo back. So far.
lazyjoe
fuel screw!!!!
 
Posts: 94
Joined: Mon Aug 20, 2007 10:03 am
Location: Kansas
Top

Re: Places to buy 1st Gen Parts

Postby oldestof11 » Fri Feb 19, 2010 5:45 pm

http://goerend.com/ Good for a top of the line torque converter
http://www.suncoastconverters.com Another Tranny company
http://www.southbendclutch.com/dynamax.html Top of the Line clutch company. Call Peter.
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4141
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: Places to buy 1st Gen Parts

Postby FRadisi » Tue Apr 20, 2010 4:18 pm

http://www.partstrain.com - Really just about any OE part you might need.
Image
Image
FRadisi
fuel screw!!!!
 
Posts: 112
Joined: Sun May 31, 2009 12:46 pm
Location: Cypress, TX
Top

Re: Places to buy 1st Gen Parts

Postby GoldenRule » Mon Oct 08, 2012 1:27 am

GoldenRule
fuel screw!!!!
 
Posts: 30
Joined: Fri Dec 09, 2011 1:07 am
Location: Prescott, AZ
Top

Re: Places to buy 1st Gen Parts

Postby AlKra » Tue Aug 04, 2015 4:53 pm

I am pretty surprised nobody on here referenced CPP Diesel. They have been my go to store for diesel parts shopping:
http://cppdiesel.com/dodge-cummins/89-93-cummins/
AlKra
smoke screw?
 
Posts: 1
Joined: Tue Aug 04, 2015 4:51 pm
Top


Return to Links

Who is online

Users browsing this forum: No registered users and 1 guest