Howdy from eastern Wa.

Stop in and say hi

Moderators: Greenleaf, BC847, Richie O

Howdy from eastern Wa.

Postby rockmike » Thu Jan 24, 2013 10:37 am

Hey guys,my name is Mike im a retired brick mason.I now run an autoparts store in a small rural town.Ive owned 2 1st gens but only 4 years of experiance with these diesel rigs.Been learning ALOT! on these forums and have built up my second truck now into a pretty good towing machine.

93 d350 5 speed.
Image

my frito lay trailer I built into a toy hauler.
Image

My interest are not leaving anything stock lol I like to tinker in the shop,metal fab is my hobby,I enjoy shooting and collecting guns,dont do any hunting anymore,but I try to get up in the woods to go 4 wheelin any chance I get!in my sumurai buggy I built from scratch,took my lil over 3 years to build the buggy.
Image
rockmike
fuel screw!!!!
 
Posts: 94
Joined: Mon Jan 21, 2013 3:58 pm
Location: Benton City,Wa.

Re: Howdy from eastern Wa.

Postby ellis93 » Thu Jan 24, 2013 10:55 am

Welcome!
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi

Re: Howdy from eastern Wa.

Postby tampabayBill » Thu Jan 24, 2013 12:30 pm

Welcome !
93D250 CC LE, 62/65/13 S300, PDR cam,DDP3's, B&D IP, 366 GSK, M3 & timing device, Air Dog 150, Cooler tubes, 3 piece manifold, BHAF & 4" tbe, ported & O ringed, ARP studs, 60# springs 47RH & 3 disc conv., fp, aux trans cooler, fluid damper, 3:54 D70 w/trac-lok, rear sway bar, gauges = egt,boost, tach, 47RH & diff. temps.
Twins coming soon!
tampabayBill
fuel screw!!!!
 
Posts: 293
Joined: Sat Oct 09, 2010 7:51 am
Location: New Port Richey, Fla.
Top

Re: Howdy from eastern Wa.

Postby RumbleFish » Thu Jan 24, 2013 2:35 pm

Welcome! Im diggin the toy hauler!
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: Howdy from eastern Wa.

Postby dazedandconfused » Thu Jan 24, 2013 2:43 pm

Welcome
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: Howdy from eastern Wa.

Postby cmann250 » Thu Jan 24, 2013 4:03 pm

Welcome, we've had a ton of eastern Washington guys show up lately it seems
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: Howdy from eastern Wa.

Postby rockmike » Fri Jan 25, 2013 9:49 am

Thanks guys,appreciate it.
rockmike
fuel screw!!!!
 
Posts: 94
Joined: Mon Jan 21, 2013 3:58 pm
Location: Benton City,Wa.
Top

Re: Howdy from eastern Wa.

Postby rockmike » Fri Jan 25, 2013 6:36 pm

RumbleFish wrote:Welcome! Im diggin the toy hauler!

Thanks! it was alot of work and it fits my needs so perfect.
Image
Image
The rig fits in there just right.
rockmike
fuel screw!!!!
 
Posts: 94
Joined: Mon Jan 21, 2013 3:58 pm
Location: Benton City,Wa.
Top

Re: Howdy from eastern Wa.

Postby RumbleFish » Fri Jan 25, 2013 7:13 pm

Nice setup. Looks like a tight fit!
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: Howdy from eastern Wa.

Postby CumminsPower59 » Sat Jan 26, 2013 7:37 am

Welcome! I really dig the Samurai! Wish mine was in better wheeling shape....
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: Howdy from eastern Wa.

Postby rockmike » Sat Jan 26, 2013 11:27 am

CumminsPower59 wrote:Welcome! I really dig the Samurai! Wish mine was in better wheeling shape....



Get after it! :) Ive been into zuks for well over 10 years now...awsome rigs! although mine aint a whole lot of zuk anymore...
rockmike
fuel screw!!!!
 
Posts: 94
Joined: Mon Jan 21, 2013 3:58 pm
Location: Benton City,Wa.
Top

Re: Howdy from eastern Wa.

Postby oldestof11 » Sat Jan 26, 2013 1:02 pm

Welcome!

Ever been to a KOH race? I want to attend one just once.
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: Howdy from eastern Wa.

Postby rockmike » Sat Jan 26, 2013 3:53 pm

oldestof11 wrote:Welcome!

Ever been to a KOH race? I want to attend one just once.

I have not,I got some freinds that go everyyear.Its just at the wrong time of year for me to go.The farmers are gettin pretty busy at the begining of feb. workin on there equipment.

I would like to attend once though just to see what its about,and say ive been there and done that. :)

We did easter jeep safari in Moab last year,that was a blast! this year we are going the week after just because thats the way the calendar works out for week vacation.
rockmike
fuel screw!!!!
 
Posts: 94
Joined: Mon Jan 21, 2013 3:58 pm
Location: Benton City,Wa.
Top

Re: Howdy from eastern Wa.

Postby CumminsPower59 » Sat Jan 26, 2013 8:05 pm

rockmike wrote:
CumminsPower59 wrote:Welcome! I really dig the Samurai! Wish mine was in better wheeling shape....



Get after it! :) Ive been into zuks for well over 10 years now...awsome rigs! although mine aint a whole lot of zuk anymore...


I've had mine for six years. It's been good to me, I use to commute with it 95 miles one way, every day. It's not much zuki either anymore, mainly rust....and holes :shock:
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top


Return to Welcome

Who is online

Users browsing this forum: No registered users and 23 guests