Hello world

Stop in and say hi

Moderators: Greenleaf, BC847, Richie O

Hello world

Postby 93MilitiaMobile » Mon Feb 24, 2014 10:11 am

Image

Well here is my new baby, had her for about 2.5 months now and loving every minute of it. Spent 2 weeks with it stripped down and repaired some floorboards and cab mount rust. Then spray lined the floor and glued down some Mass loaded vinyl for a little sound proofing. It'll take more love down the road but rides a damn sight more quietly after that mod. Can't wait for some spare funds to start playing with the motor more (LPG set up, springs and gizmos etc). And the air ride seat the PO installed :mrgreen: don't get much better then that bub. (Bostrum Talladega series) Haven't gotten her stuck yet and i've tried in some pretty serious snow with huh? tires. Gotta love that half ton motor over the front axle ;) looking forward to getting and hopefully giving some sound advise in the future. PS anyone know how to enable my avatar, cant get that one figured out. I'm significantly more mechanically inclined then i am computer savvy (hence my love to the VE pump!!!) ((KISS principle, Keep It Simple Stupid))

Cheers,
Ray
93 W350 dually w/ sleeper cab and flatbed, 6bta 160 IC, G360, BHAF, 366 spring, H&M DTA, HungryDiesel AFC Spring, 4in exhaust, Warn hubs, 3.54's, headlight relay, Bilsteins, Pacbrake airbags, Jungles "shelf-it", LED's FUTURE MODS 60lbs valves, injectors, EX brake, Gear Vendor, remote oil filter, Mag-tec diff covers, LPG injection, dual batteries, Alt upgrade, RamCharger 2nd tank
93MilitiaMobile
fuel pin?
 
Posts: 8
Joined: Mon Feb 24, 2014 9:00 am

Re: Hello world

Postby RCCUMMINS89 » Mon Feb 24, 2014 12:04 pm

Welcome, good looking truck.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID

Re: Hello world

Postby ellis93 » Mon Feb 24, 2014 1:20 pm

Howdy
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: Hello world

Postby PToombs » Mon Feb 24, 2014 6:14 pm

Welcome! Go to the "User Control Panel" in the top left corner under the logo, then hit "profile" and under that you will see avatar, signature, etc. Filling out your sig is a good idea too when asking for help troubleshooting so we know what you have. ;)
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: Hello world

Postby CumminsPower59 » Mon Feb 24, 2014 6:59 pm

Welcome!
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: Hello world

Postby cmann250 » Mon Feb 24, 2014 7:04 pm

Whalecum! Interesting machine you have there. I always kind of wanted to take my Dodge on a cross country trip. And then I remember how my butt falls asleep at about an hour in.
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: Hello world

Postby 93MilitiaMobile » Mon Feb 24, 2014 7:07 pm

Pete, got that part but sadly it is telling me that the avatar is disabled and won't seem to allow me to enable it...... ? (sigh) computers....... Maybe an admin thing?
93 W350 dually w/ sleeper cab and flatbed, 6bta 160 IC, G360, BHAF, 366 spring, H&M DTA, HungryDiesel AFC Spring, 4in exhaust, Warn hubs, 3.54's, headlight relay, Bilsteins, Pacbrake airbags, Jungles "shelf-it", LED's FUTURE MODS 60lbs valves, injectors, EX brake, Gear Vendor, remote oil filter, Mag-tec diff covers, LPG injection, dual batteries, Alt upgrade, RamCharger 2nd tank
93MilitiaMobile
fuel pin?
 
Posts: 8
Joined: Mon Feb 24, 2014 9:00 am
Top

Re: Hello world

Postby 93MilitiaMobile » Mon Feb 24, 2014 7:09 pm

Cmann.... Bostrum Talladega series I think a 910s...... talk about a seat..... came with the truck and damn is that air ride nice
93 W350 dually w/ sleeper cab and flatbed, 6bta 160 IC, G360, BHAF, 366 spring, H&M DTA, HungryDiesel AFC Spring, 4in exhaust, Warn hubs, 3.54's, headlight relay, Bilsteins, Pacbrake airbags, Jungles "shelf-it", LED's FUTURE MODS 60lbs valves, injectors, EX brake, Gear Vendor, remote oil filter, Mag-tec diff covers, LPG injection, dual batteries, Alt upgrade, RamCharger 2nd tank
93MilitiaMobile
fuel pin?
 
Posts: 8
Joined: Mon Feb 24, 2014 9:00 am
Top

Re: Hello world

Postby cmann250 » Mon Feb 24, 2014 7:14 pm

93MilitiaMobile wrote:Cmann.... Bostrum Talladega series I think a 910s...... talk about a seat..... came with the truck and damn is that air ride nice

Is it like an air seat in a semi? Do you bang your head off of the ceiling much? I feel like I sit way high up in the cab in a semi and I'm only 6'-0".
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: Hello world

Postby RumbleFish » Mon Feb 24, 2014 9:10 pm

Might need the minimum post count for things like avatar?
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: Hello world

Postby 93MilitiaMobile » Tue Feb 25, 2014 7:53 am

Similar to a semi seat but built to be a low profile version(also, it's the mid back version, but the high back would fit). I'm 6'2-3" depending on gravity and how lazy i feel that day, and i have it set at the lowest position which gives me a solid 3-4 inches of head room when the seat tops out in travel(and about 4-5in of travel at that setting, more travel at a different setting). I have to hit a serious bump for that, but no head knocking, not even close. Eventually i plan to do a little fab work and drop the floor pan a few inches in the rear to gain more travel out of the seat. Right now, with the way our floors slope under the seat area, it is mounted with a piece of 3x3 box channel under the front of the base plate to level it out. If you can score one for the right price (ahem! Ebay! ahem!) deffinantly worth it, I plan to grab one for the lady some day. Though she doesn't mind the RamCharger seat that is over there. That sucker is comfy too.
93 W350 dually w/ sleeper cab and flatbed, 6bta 160 IC, G360, BHAF, 366 spring, H&M DTA, HungryDiesel AFC Spring, 4in exhaust, Warn hubs, 3.54's, headlight relay, Bilsteins, Pacbrake airbags, Jungles "shelf-it", LED's FUTURE MODS 60lbs valves, injectors, EX brake, Gear Vendor, remote oil filter, Mag-tec diff covers, LPG injection, dual batteries, Alt upgrade, RamCharger 2nd tank
93MilitiaMobile
fuel pin?
 
Posts: 8
Joined: Mon Feb 24, 2014 9:00 am
Top

Re: Hello world

Postby PToombs » Tue Feb 25, 2014 6:17 pm

Jeff may be right on the post count thing.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: Hello world

Postby Dodgeballs » Sun Mar 23, 2014 12:25 pm

RumbleFish wrote:Might need the minimum post count for things like avatar?


I joined the site today and my Avatar is disabled as well. I am pretty sure that you need more posts before this function is enabled. :cry:
1993 W250 clubcab auto 12v all stock 140k, 2006 quadcab longbed 4x4 auto all stock 80k.
Dodgeballs
fuel pin?
 
Posts: 19
Joined: Sun Mar 23, 2014 6:30 am
Location: Elbert County, Colorado
Top


Return to Welcome

Who is online

Users browsing this forum: No registered users and 5 guests