New here from Alberta

Stop in and say hi

Moderators: Greenleaf, BC847, Richie O

New here from Alberta

Postby jay » Mon Oct 06, 2014 6:02 am

Well on my second 1st gen just about had my 93 where I wanted it before it got killed
92 D350 CC bd diesel fuel pin and governor spring timing advanced 6 degrees power screw turned.Had a 93 D250 CC denny t fuel pin 3200 governor spring timing advanced 6 degrees power screw done 100 hp DSS injectors he 351 turbo dual disc clutch
jay
fuel pin?
 
Posts: 9
Joined: Sun Oct 05, 2014 4:19 pm
Location: Blackfalds Alberta

Re: New here from Alberta

Postby oldestof11 » Mon Oct 06, 2014 6:13 am

Welcome!

We have an active member here from Alberta I believe. I know he's canadian.
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois

Re: New here from Alberta

Postby RCCUMMINS89 » Mon Oct 06, 2014 7:27 am

Welcome
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: New here from Alberta

Postby ellis93 » Mon Oct 06, 2014 9:53 am

Welcome! How'd it die?
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: New here from Alberta

Postby DMan1198 » Mon Oct 06, 2014 11:02 am

oldestof11 wrote:Welcome!

We have an active member here from Alberta I believe. I know he's canadian.

Hey I resemble that remark. Welcome
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: New here from Alberta

Postby dazedandconfused » Mon Oct 06, 2014 2:20 pm

Welcome to the site.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: New here from Alberta

Postby BILTIT » Mon Oct 06, 2014 2:40 pm

Welcome, i am not in alberta but i am 3 blocks away from the alberta border lol.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: New here from Alberta

Postby jay » Mon Oct 06, 2014 4:23 pm

Well we had a headon. But it had a bit done to it denny t pin 3200 spring 3rd gen turbo 100hp sticks dual disc clutch power screw dialed up starwheel turned 2 turns timing advanced 6 degrees
92 D350 CC bd diesel fuel pin and governor spring timing advanced 6 degrees power screw turned.Had a 93 D250 CC denny t fuel pin 3200 governor spring timing advanced 6 degrees power screw done 100 hp DSS injectors he 351 turbo dual disc clutch
jay
fuel pin?
 
Posts: 9
Joined: Sun Oct 05, 2014 4:19 pm
Location: Blackfalds Alberta
Top


Return to Welcome

Who is online

Users browsing this forum: No registered users and 6 guests

cron