Hi!! I'm Cody, new to the forum. here is my truck!!

Stop in and say hi

Moderators: Greenleaf, BC847, Richie O

Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Sun Aug 09, 2015 7:26 pm

Hello to all!! this is my 92 dodge w250 5 speed!!
I don't have any pre-paint pictures of the truck (ya im dumb and didnt take any.. i kno.. :? :shock: )
BUT here is the truck now!! ;) :D
soon i will be in the process of removing the 5 speed and installing a built 47rh and some twin turbos!! :P

The truck has new bumpers front/rear, all new lights, new grill, new mirrors, new front and rear windows, 4inch turbo back pipe, fresh paint, seat/carpet/headliner refinished, new seatbelts, tires (ss m16's), new rims, a-pillar with some gauges, and gauges redone on the inside of the dash (all led green to match the pod!)
Last edited by cmauz61 on Sun Aug 09, 2015 7:42 pm, edited 1 time in total.
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Sun Aug 09, 2015 7:40 pm

Image

Image

Image

[img]http://i173.photobucket.com/albums/w74/jcmauzey/Picture%20371_zpsyvlxrfjv.jpg
[/img]
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Sun Aug 09, 2015 7:46 pm

I think i posted the photos correctly? i have more of the inside and so on if someone wants to see. Just let me know if you can see the photos!
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby Farmboy » Mon Aug 10, 2015 7:11 am

Nice looking truck! But I am a little biased.. lol. mine is almost the same color!

By the way, whats all that white stuff on the ground? Looks like you are in NC??
1990 W350 4X4 NOW INTERCOOLED 5-speed. Boost/Pyro. Few light tweaks to the pump. Now a dually with an aluminum flatbed!!
User avatar
Farmboy
14mm rotor
 
Posts: 620
Joined: Wed Dec 17, 2008 11:47 am
Location: Between the corn fields of Ohio
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Mon Aug 10, 2015 7:57 am

I love the color!! had it painted a couple years ago.
I finished the truck up when i lived in illinois.
The painter called me up right after the snow storm to tell me to come get it.. i hated getting it dirty seconds after it was done. lol
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby oldestof11 » Mon Aug 10, 2015 11:02 am

Gorgeous!

I like the wheel and tire combo. Not stanced or black or deep dish.
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby ellis93 » Mon Aug 10, 2015 3:37 pm

Welcome! Nice truck
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7761
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Mon Aug 10, 2015 10:34 pm

Thanks for the replies :)
Yeah, it took awhile for me to find the right rim/tire combo I liked on the 1st gen.. Looked at a lot of aftermarket rims before I found those.
Pretty soon I might start a build thread for the truck. Gonna get a bigger cam/head/springs/pushrods and head stud it, for a future compound turbo setup w/ built auto. But I don't want to drag the thread out forever while I save and slowly do this. Maybe a couple small threads instead just to share. motor work thread first then maybe a getrag to 47rh auto swap (don't think maybe ppl have posts on that lol but I could be wrong) and then maybe a compound turbo injector set thread :bom:
I dunno yet!!
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby RCCUMMINS89 » Tue Aug 11, 2015 9:07 am

Welcome.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby Turbo67 » Thu Aug 13, 2015 10:32 pm

Very nice truck! Love the stance and color. It looks straight as an arrow. That is not an easy thing to achieve! Replacing the trim , grill, mirrors, etc really sets it off.
Thanks for sharing.
Turbo67
93 Cummins 5.9L, VE Pump, 300,000 miles
4200 RPM Spring, indexed stock fuel pin, Fuel Screw maxed, then replaced with longer "Hot Screw", aneroid screw tweaked
Turbo67
fuel pin?
 
Posts: 24
Joined: Fri Jul 17, 2015 8:50 pm
Location: North Alabama
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby CumminsPower59 » Fri Aug 14, 2015 8:38 am

Welcome!

Very nice truck. I really like that re covered seat, what material was used on that?
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Fri Aug 14, 2015 12:36 pm

I am not really sure lol.. i had an interior shop in Illinois do the seat (i picked the color and he picked what he said was a durable fabric. It is suppose to resist liquids also.)
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Fri Aug 21, 2015 8:10 am

hey cumminspower59 i looked and i have some extra fabric, but there is no details on exactly what it is.

I have a question. I see some ppl on here with pics of there trucks/among other things in there little piece of info on the far left by their join date. how do i do that>!?
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby PToombs » Fri Aug 21, 2015 5:36 pm

Go to your "user control panel" in the top left corner and then "edit profile', and under that find "edit avatar" That is what that location is called.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: Hi!! I'm Cody, new to the forum. here is my truck!!

Postby cmauz61 » Fri Aug 21, 2015 9:30 pm

Thanks for the info! I tried to change mine but its disabled..
1992 dodge w250 12v
4" turbo back exhaust, denny t fuel pin, 12mm pump cranked, 4,200 rpm spring, afe intake/filter, egt gauge, boost gauge.
User avatar
cmauz61
fuel screw!!!!
 
Posts: 78
Joined: Sun Aug 09, 2015 6:32 pm
Location: raleigh, NC
Top

Next

Return to Welcome

Who is online

Users browsing this forum: No registered users and 8 guests