Need help verifying brake parts

everything but the drivetrain

Moderators: Greenleaf, BC847, Richie O

Need help verifying brake parts

Postby Fred_M1010 » Thu Jun 27, 2019 9:14 am

Hello guys!
My W250 has a really bad parking brake, and I need to fix it to pass inspection.
I've always had problems with this every inspection, so now I think I'll replace the drums and all.
(The drums have been turned earlier, and the diameter is over the service limit now)

Could anyone please take a quick look at my shopping cart to see if I've got things right?
The shipping for a pair of drums to Sweden is not cheap, so I want to make sure I get the right ones...

I know it's a dana 70 axle, and I'm pretty sure that I've got the 12"x3" brakes.
(It's a CTD -91.5 W250 regular cab with long bed and srw)

Here's a link to the shopping cart
http://www.rockauto.com/xx/cart/?cartid ... 8f1c159ee6

(I already have a new rear right parking brake cable, that's why it's not included)

I would really appreciate the help!
And feel free to suggest other parts that might be good to change while I'm at it.

/Fredrik
-91.5 W250
User avatar
Fred_M1010
fuel screw!!!!
 
Posts: 139
Joined: Tue Feb 23, 2010 7:48 am
Location: Sweden

Re: Need help verifying brake parts

Postby Fred_M1010 » Wed Jul 03, 2019 1:47 am

Nevermind, I've already ordered it.
-91.5 W250
User avatar
Fred_M1010
fuel screw!!!!
 
Posts: 139
Joined: Tue Feb 23, 2010 7:48 am
Location: Sweden

Re: Need help verifying brake parts

Postby Begle1 » Thu Jan 16, 2020 5:40 pm

Hello Swedish "need to fix the parking brake to pass inspection" buddy! I'm in the middle of doing the same thing in Hawaii.

I have one wheel that doesn't spring back very well, and at some point the cable stops both fell off. I've crimped on aluminum cable stops and tested it once and it works well enough, so now I just need it to hold together for tomorrow...
1990 D-250 Regular Cab: Tweaked injection pump, built transmission, a cataclysmic charlie foxtrot of electronics, the most intense street-ran water injection system in the country, and some more unique stuff.
User avatar
Begle1
14mm rotor
 
Posts: 1939
Joined: Sat Jan 06, 2007 5:31 pm
Location: Capo Beach, California
Top

Re: Need help verifying brake parts

Postby Fred_M1010 » Fri Jan 17, 2020 3:36 am

Hi, I actually haven't fixed the brakes yet :oops:
It's a farm truck and I don't use it so much now a days.
I'm keeping my fingers crossed for you! :)
-91.5 W250
User avatar
Fred_M1010
fuel screw!!!!
 
Posts: 139
Joined: Tue Feb 23, 2010 7:48 am
Location: Sweden
Top

Re: Need help verifying brake parts

Postby Begle1 » Tue Mar 31, 2020 6:44 pm

I passed my inspection! I had aluminum cable crimps on the cables, they lasted for three applications of the brake but only needed to last for one so I'm good for a year!
1990 D-250 Regular Cab: Tweaked injection pump, built transmission, a cataclysmic charlie foxtrot of electronics, the most intense street-ran water injection system in the country, and some more unique stuff.
User avatar
Begle1
14mm rotor
 
Posts: 1939
Joined: Sat Jan 06, 2007 5:31 pm
Location: Capo Beach, California
Top

Re: Need help verifying brake parts

Postby Fred_M1010 » Wed Apr 01, 2020 1:40 am

Congrats!
One application is all we need :lol:
-91.5 W250
User avatar
Fred_M1010
fuel screw!!!!
 
Posts: 139
Joined: Tue Feb 23, 2010 7:48 am
Location: Sweden
Top


Return to Chassis

Who is online

Users browsing this forum: No registered users and 2 guests