1stGen.org

by **stock91w350** » Mon Jan 25, 2010 12:55 pm

is it the big grey clip that goes into box behind the glove box door? i unplugged it and it took off the abs light but not the other brake light. ther is a little black connector behind there also but ther is nothing plugged into it

by **BobS** » Mon Jan 25, 2010 1:49 pm

You unplugged the ABS brainbox. The other light is coming from the brake system itself probably because it is sensing a problem.

by **dpuckett** » Mon Jan 25, 2010 3:44 pm

Check your parking brake set up. If the light/switch isnt right, or if the brake pedal doesnt come all the way back up, it will light the BRAKE light.

by **stock91w350** » Tue Jan 26, 2010 6:32 am

dpuckett wrote:Check your parking brake set up. If the light/switch isnt right, or if the brake pedal doesnt come all the way back up, it will light the BRAKE light.

i unplugged the little black wire that goes to the ebrake but it stayed on

by **stock91w350** » Tue Jan 26, 2010 6:47 am

BobS wrote:You unplugged the ABS brainbox. The other light is coming from the brake system itself probably because it is sensing a problem.

so i unplugged the right thing? lol, i wasent sure because i saw a picture on one of the stickys and they were pointing to a lilttle black clip i believe and i unplugged a big grey clip that goes into the box

by **PToombs** » Tue Jan 26, 2010 6:18 pm

You may have a vacuum problem. Pretty sure that makes the brake light come on too. Sender is behind the hood hinge on the drivers side.

by **dpuckett** » Tue Jan 26, 2010 6:20 pm

Pete, you're right. I had forgotten that. Most of the vacuum systems I've tested were in the 20+ inHg range. Old 91 pulled 28 inHg.

1stGen.org

brake switch behind glove box door

brake switch behind glove box door

Who is online