What master cylinder do I need
Moderators: Greenleaf, BC847, Richie O
2 posts
• Page 1 of 1
What master cylinder do I need
by Collers9640 » Sun Oct 11, 2015 10:05 am
Anybody know what master cylinder will fit 1st gen brake lines and will fit the 1994 Chevy c3500 hydroboost I used?
77’ W200 Cummins- Auto, BHAF, 4” Exhaust
91.5 W250 Cummins Conversion- PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1984 D350 Crew Cab (Future Cummins Project)
91.5 W250 Cummins Conversion- PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1984 D350 Crew Cab (Future Cummins Project)
- Collers9640
- fuel screw!!!!
- Posts: 171
- Joined: Wed Feb 24, 2010 4:25 pm
- Location: Charleston SC
Re: What master cylinder do I need
by CumminsPower59 » Mon Oct 12, 2015 7:41 am
Why not use the GM master? If the fittings are different, there are DOT compliant adapters/fittings that cane be used to get it to work. Most auto parts stores can get them...
Ike
91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
- CumminsPower59
- 14mm rotor
- Posts: 3203
- Joined: Mon Feb 25, 2008 8:04 am
- Location: The Hawkeye State of 'Murica!