source for brake proportioning valve?

everything but the drivetrain

Moderators: Greenleaf, BC847, Richie O

source for brake proportioning valve?

Postby 284 » Tue Apr 29, 2008 4:08 pm

Every part of the brake system has been replaced....'cept that one.
Well, it blew out, so i need to find another one.

Any ideas?

Thanks.
91.5 D250, 518, stock.
284
fuel screw!!!!
 
Posts: 36
Joined: Sun Mar 16, 2008 12:50 pm
Location: denver

Postby mprmn08 » Tue Apr 29, 2008 4:21 pm

The proportining valve controls the rear so if its not inline the it should be at the split point. i.e. were the line splits to go to each wheel on the rear axle. i dont know 100% but thats were it should be.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI

Postby 284 » Tue Apr 29, 2008 4:42 pm

thanks, but I need to find out where to locate one, other than the leaking one on my truck. ;)
91.5 D250, 518, stock.
284
fuel screw!!!!
 
Posts: 36
Joined: Sun Mar 16, 2008 12:50 pm
Location: denver
Top

Postby mprmn08 » Tue Apr 29, 2008 4:49 pm

ya im sorry. i didnt read it all before i decided to post :grrr: sorry head not in it today :bh: autozone or advance or something like that doesnt have one??
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top

Postby 284 » Tue Apr 29, 2008 5:28 pm

nope. had to get it from a dealer and he had to get it from someplace back east.

BTW, "just say no to autozone". They are always higher than everyone else. Heck, on one unit alone, they were $230 higher than napa. And napa had it for $18.00. :D
91.5 D250, 518, stock.
284
fuel screw!!!!
 
Posts: 36
Joined: Sun Mar 16, 2008 12:50 pm
Location: denver
Top


Return to Chassis

Who is online

Users browsing this forum: No registered users and 38 guests