ongoing problem

[93 dually]

Dose anyone have a a trick lining up d350 coined wheels ive had the problem since i bought my truck had cast outer wheels before. Figured because of the cast wheels not being coined was my problem but im having the same thing happen with the stock wheels.Ive replaced bearings drums studs and the wheels still dont line up right any help

[CAJUN 93]

my rear drums have a locating pin that indexes the wheels to the proper location. the wheels have slots in them. just line up the pin to the slot and you cant go wrong. if you dont have the pins you'll just have to take your time to make sure the innies line up with the outies

daryl

[KTA]

I use 2 coned nuts to line them up works great. I got the nuts out of the Stud bin at my local parts house.

[wannadiesel]

I use 2 coned nuts to line them up works great. I got the nuts out of the Stud bin at my local parts house.

Yep. That is how the owner's manual says to do it. There's a pair in my ash tray.

[93 dually]

thanks guys it worked