Facebook page

Moderator: BC847

Facebook page

Postby swank » Sun Apr 10, 2011 8:34 pm

Hi Everybody. Just wanted to let ya'll know that I just put a Facebook page together for the site. All I'm figuring it'll be good for is if the site goes down like it does on occasion, or if you are having some other kind of trouble accessing or something. All I plan on using it for is an easy way to just check on if the site is ok.

The link is:

http://www.facebook.com/1stgen

Anyway, just thought I'd throw that out there.

Dave
truck
User avatar
swank
Administrator
 
Posts: 590
Joined: Mon Jan 01, 2007 12:20 pm
Location: boise, id

Re: Facebook page

Postby fatty » Sun Apr 10, 2011 9:30 pm

Sounds pretty cool. Too bad I don't have a facebook account though...
91.5 w250
fatty
14mm rotor
 
Posts: 780
Joined: Tue Nov 04, 2008 8:52 pm
Location: Washington

Re: Facebook page

Postby PToombs » Mon Apr 11, 2011 5:39 pm

Eeewwww, Facebook! :shock: I bet me and fatty are the only people in the world that don't have it. :lol:

Thanks Swank, if I ever figure out the whole Facebook thing it may be handy.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11281
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: Facebook page

Postby Richie O » Mon Apr 11, 2011 7:00 pm

I don't have facebook either. Not really into the whole " network " kind of thing. Plus I thought you needed " friends " to have facebook. I don't have any of those. :lol: Just ask Pete how ugly I am and you would understand. 8)
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4100
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: Facebook page

Postby swank » Mon Apr 11, 2011 7:37 pm

Trust me, you're not missing out on much. I just figured it'd be a good way to let folks know what's going on if things go awry or something. We'll see. I don't think there are many people who are into 1st gens AND facebook though.
truck
User avatar
swank
Administrator
 
Posts: 590
Joined: Mon Jan 01, 2007 12:20 pm
Location: boise, id
Top

Re: Facebook page

Postby Richie O » Mon Apr 11, 2011 7:44 pm

Isn't everyone a first gen fan? :mrgreen:
I think it will work fine. Alot of people have facebook, just not my cup of tea.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4100
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: Facebook page

Postby SNOOT » Mon Apr 11, 2011 8:05 pm

I don't want to know what Richie is doing on a Friday night when I get home to watch the news... I do have Facebook and its great to find some of your old buddies and see what they are up too.
1993 W350
User avatar
SNOOT
14mm rotor
 
Posts: 609
Joined: Tue Mar 11, 2008 8:05 pm
Location: Seattle, WA.
Top

Re: Facebook page

Postby BobS » Tue Apr 12, 2011 3:38 am

PToombs wrote:Eeewwww, Facebook! :shock: I bet me and fatty are the only people in the world that don't have it. :lol:


You are NOT alone. I'm NOT on facebook, twitter, nor do I have a cellphone since I retired. How's that for isolationism?
BobS

Creating jobs is a byproduct of making a PROFIT!

91.5 W250 NV4500 Conversion
89 D350 Stock
92 W250 Crew Cab finally in progress
86 D150 wannabe 4BT http://4btswaps.com/
User avatar
BobS
14mm rotor
 
Posts: 639
Joined: Sat Jan 06, 2007 3:16 pm
Location: SW Pa - Greene County
Top

Re: Facebook page

Postby ahale2772 » Tue Apr 12, 2011 4:27 am

facebook can be fun when you have a good group of friends, its good that you can control exacly what you want to get out, therefore if you are carefull about it there is minimal risk of sharing info that you dont want out.
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts
Top

Re: Facebook page

Postby ellis93 » Tue Apr 12, 2011 5:18 am

Its not that bad. I've had one for awhile to find some highschool buddies that I lost touch with when I moved to texas. I'm hardly ever on it now.
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7748
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: Facebook page

Postby 1STGENFARMBOY » Tue Apr 12, 2011 6:08 am

I'm trying to revolt against all this new crap, don't have facebook, sat TV, a green car , bluetooth, or none of that stuff,
if it wasn't for the diesel sites and a couple camper sites and looking up parts i would have the internet, i don't guess
theres nothin wrong with it, it just ain't me.

Dar
93 W250 STD CAB, AUTO 3.55, GAUGES, 80HP DDP STICKS, DENNY T ,16CM HOUSING, 60MM GILLETT, VE MAXED,BHAF, BHFF, 366 SPRING,P/S INTERCOOLER, TIMS COOLER TUBS, TIMMING 1/8 BUMP,4in TURBO BACK TO DUEL 5IN STACKS,33 12.50 BFG, HOLLEY BLACK, CONVERTER COOMING.
User avatar
1STGENFARMBOY
14mm rotor
 
Posts: 2065
Joined: Mon Sep 28, 2009 2:23 pm
Location: PITTSBURG ILL
Top

Re: Facebook page

Postby PToombs » Tue Apr 12, 2011 5:39 pm

What's wrong with a green car? And yes, Rich is hideous! He scared my dog into early labor, and it's a boy! :lol:
Snoot, I'm waiting to watch the news and see Richie on it, I figure he's just about ready to go Postal.......... :mrgreen:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11281
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: Facebook page

Postby ahale2772 » Wed Apr 13, 2011 5:33 am

I "liked it" yesterday, its the first and only thing i have every "liked" on facebook, im glad that previlage went to something good
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts
Top

Re: Facebook page

Postby Tacoclaw » Wed Apr 13, 2011 8:44 am

Me too.

Guess they're piling in there now, I was #10 at noon-ish yesterday, now there's 17. :)
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4092
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: Facebook page

Postby ahale2772 » Wed Apr 13, 2011 9:05 am

at that rate, exponentially we should be in the 1,000,000 range in a few weeks! :shock:
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts
Top

Next

Return to 1st Gen.org News

Who is online

Users browsing this forum: No registered users and 1 guest