Overhead switch panel.

Moderators: Greenleaf, BC847, Richie O

Overhead switch panel.

Postby 1stgenblowingsmoke » Sat Aug 27, 2011 4:16 pm

Well it's not the cleanest but it work good plus I cut a hole in the bottom to mount the map light from under my dash that broke out.

Image

It's just some metal flashing for a house I bent n shaped just right for the roof then ran electrical take along the top edge to keep it from vibrating. I can add more switches when the time comes.
90 LE 250 reg cab 4x4 5 speed getrag. Fuel screw turned to factory stop, throttle rod mod, 3.5in flow through exhaust, #75 fuel pin rotated, HX-35 waiting to on along with an intercooler.
1stgenblowingsmoke
fuel screw!!!!
 
Posts: 32
Joined: Thu May 26, 2011 10:30 pm

Re: Overhead switch panel.

Postby Cantrell2500HD » Fri Jun 22, 2012 7:25 pm

This made me lol but it's very creative, good job.
Cantrell2500HD
fuel pin?
 
Posts: 18
Joined: Mon Jun 18, 2012 6:07 pm
Location: Cedar Park, Tx

Re: Overhead switch panel.

Postby KurtzN1 » Thu Sep 27, 2012 10:53 am

haha, not what i was expecting, nice.
KurtzN1
fuel screw!!!!
 
Posts: 30
Joined: Tue Mar 27, 2012 1:27 pm
Top

Re: Overhead switch panel.

Postby KurtzN1 » Thu Sep 27, 2012 10:57 am

at least it looks age correct!
KurtzN1
fuel screw!!!!
 
Posts: 30
Joined: Tue Mar 27, 2012 1:27 pm
Top

Re: Overhead switch panel.

Postby BILTIT » Thu Sep 27, 2012 12:41 pm

Maybe try one of these? Put all the switches you could find into it.

http://ramchargercentral.com/jungleshdd ... -progress/
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top


Return to Cool projects YOU can do

Who is online

Users browsing this forum: No registered users and 8 guests