Ramcharger buckets.

Moderators: Greenleaf, BC847, Richie O

Ramcharger buckets.

Postby 1stgenblowingsmoke » Sat Aug 27, 2011 4:28 pm

This isn't very indepth but here's my ramcharger seat install.
I hope you can see the factory bench seat mounting holes the two outer holes for the buckets use those same two holes. For the other two holes I just drilled them into the floor n put some big washers on the bottom then bolted the seat brackets down.
Image

I had to trim about two inches forward however wide the brackets went then about two inches off the back of the carpet for them to fit right.
Image

I have a pic somewhere with the pass side seat bracket mounted in but can't find it anyway here is the end result.

Image
90 LE 250 reg cab 4x4 5 speed getrag. Fuel screw turned to factory stop, throttle rod mod, 3.5in flow through exhaust, #75 fuel pin rotated, HX-35 waiting to on along with an intercooler.
1stgenblowingsmoke
fuel screw!!!!
 
Posts: 32
Joined: Thu May 26, 2011 10:30 pm

Re: Ramcharger buckets.

Postby 1stgenblowingsmoke » Sat Aug 27, 2011 4:28 pm

Seams my pics got cut off on the right.
90 LE 250 reg cab 4x4 5 speed getrag. Fuel screw turned to factory stop, throttle rod mod, 3.5in flow through exhaust, #75 fuel pin rotated, HX-35 waiting to on along with an intercooler.
1stgenblowingsmoke
fuel screw!!!!
 
Posts: 32
Joined: Thu May 26, 2011 10:30 pm

Re: Ramcharger buckets.

Postby Richie O » Sat Aug 27, 2011 6:28 pm

Not on my screen.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: Ramcharger buckets.

Postby 1stgenblowingsmoke » Sat Aug 27, 2011 8:45 pm

Well that's weird it should show the seat backs but wont for me.
90 LE 250 reg cab 4x4 5 speed getrag. Fuel screw turned to factory stop, throttle rod mod, 3.5in flow through exhaust, #75 fuel pin rotated, HX-35 waiting to on along with an intercooler.
1stgenblowingsmoke
fuel screw!!!!
 
Posts: 32
Joined: Thu May 26, 2011 10:30 pm
Top

Re: Ramcharger buckets.

Postby oldestof11 » Sat Aug 27, 2011 9:59 pm

Go to User Control Panel and pick a different forum style.

Otherwise looks great!
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: Ramcharger buckets.

Postby 1STGENFARMBOY » Thu Sep 01, 2011 2:37 pm

I have the same buckets and same covers.
93 W250 STD CAB, AUTO 3.55, GAUGES, 80HP DDP STICKS, DENNY T ,16CM HOUSING, 60MM GILLETT, VE MAXED,BHAF, BHFF, 366 SPRING,P/S INTERCOOLER, TIMS COOLER TUBS, TIMMING 1/8 BUMP,4in TURBO BACK TO DUEL 5IN STACKS,33 12.50 BFG, HOLLEY BLACK, CONVERTER COOMING.
User avatar
1STGENFARMBOY
14mm rotor
 
Posts: 2089
Joined: Mon Sep 28, 2009 2:23 pm
Location: PITTSBURG ILL
Top

Re: Ramcharger buckets.

Postby 1stgenblowingsmoke » Fri Sep 02, 2011 8:35 pm

1STGENFARMBOY wrote:I have the same buckets and same covers.


What do you think of em I love mine makes the ride feel a little less jarring.
90 LE 250 reg cab 4x4 5 speed getrag. Fuel screw turned to factory stop, throttle rod mod, 3.5in flow through exhaust, #75 fuel pin rotated, HX-35 waiting to on along with an intercooler.
1stgenblowingsmoke
fuel screw!!!!
 
Posts: 32
Joined: Thu May 26, 2011 10:30 pm
Top

Re: Ramcharger buckets.

Postby bmoeller » Mon Feb 27, 2012 6:18 pm

I sure like mine! :D FAR more comfortable than the bench they replaced. Great to be able to adjust the angle of the seat back too.
NEW- '82 CREW cab dually. Cummins, NV5600, 205, D60/D80. :D Work in progress......

'93 W350, CTD, ext cab, 5spd., HTT modded H1C, 4" exhaust, Kelderman single bag. 537k and counting!

SOLD- '92 W250, CTD, ext cab, 5spd

SOLD- '99 3500, SO CTD, 5spd

Traded off- '97 3500 CTD, 416hp/892tq.

Obama loves America, like OJ loved Nicole...................
User avatar
bmoeller
14mm rotor
 
Posts: 1448
Joined: Sat Feb 27, 2010 7:22 am
Location: NW IL
Top

Re: Ramcharger buckets.

Postby 1stgenblowingsmoke » Mon Feb 27, 2012 7:05 pm

I loved em too except mine didn't recline till I put a 2nd gen power seat bracket on the drivers side. Sadly they went to the wrecked with the truck. :( :( :(
90 LE 250 reg cab 4x4 5 speed getrag. Fuel screw turned to factory stop, throttle rod mod, 3.5in flow through exhaust, #75 fuel pin rotated, HX-35 waiting to on along with an intercooler.
1stgenblowingsmoke
fuel screw!!!!
 
Posts: 32
Joined: Thu May 26, 2011 10:30 pm
Top


Return to Cool projects YOU can do

Who is online

Users browsing this forum: No registered users and 4 guests