Dana 70 yoke, ujoint/strap kit, pinion seal part #'s

Moderators: Greenleaf, BC847, Richie O

Dana 70 yoke, ujoint/strap kit, pinion seal part #'s

Postby bgilbert » Thu Oct 20, 2011 5:35 pm

Dana 70 1410 series yoke Spicer part number is 3-4-5711-1X.

U-joint Spicer part number 5-160X. Strap kit Spicer part number is 3-70-28X.

U-bolt kit for ujoint Spicer part number is 3-94-18X

Pinion seal Spicer part number is 42449. Side note on this seal, I went all around town looking for this seal, everyone had CR and other varieties of the seal. None were the quality of the seal I found from my local Spicer distributor. Plus they ranged from $16 and up versus the $6.73 for the Spicer seal. BTW the Spicer seal was a National seal. Also a D70 pinion outer race was the perfect size seal driver tool.
Last edited by bgilbert on Tue Apr 23, 2013 1:19 pm, edited 1 time in total.
Bill Gilbert
85 D350 crew with 90 6BT intercooled Getrag 3.07's
93 D350 single cab Getrag 3.54's.
bgilbert
14mm rotor
 
Posts: 2253
Joined: Wed Jan 03, 2007 5:04 pm
Location: Terre Haute, Indiana

Re: Dana 70 yoke, ujoint/strap kit, pinion seal part #'s

Postby ahale2772 » Fri Oct 21, 2011 4:07 am

cool thanks, ill be ordering some of them straps soon, and drilling :twisted:
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts

Re: Dana 70 yoke, ujoint/strap kit, pinion seal part #'s

Postby bgilbert » Fri Oct 21, 2011 9:33 am

These straps are not u-bolt style in case you were wondering. Get four new cap screws with the two new straps. I've not had any luck with NAPA, or Meritor brand straps in the past. I think as Philip once said in the past, the only thing good in the NAPA kit is you get four new bolts :lol: .
bgilbert
14mm rotor
 
Posts: 2253
Joined: Wed Jan 03, 2007 5:04 pm
Location: Terre Haute, Indiana
Top

Re: Dana 70 yoke, ujoint/strap kit, pinion seal part #'s

Postby ahale2772 » Fri Oct 21, 2011 11:01 am

oh :oops: i thought you were talking u-bolt style

i got the same spicer kit with the four bolts, they worked fine...so far
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts
Top

Re: Dana 70 yoke, ujoint/strap kit, pinion seal part #'s

Postby Philip » Mon Nov 28, 2011 7:55 pm

I think as Philip once said in the past, the only thing good in the NAPA kit is you get four new bolts .


Yea I did. :lol:
93 W350 Club/cab w/duals, buckets & console, B&W flatbed, G56, 6 spd, 3:07 rears, gages, HX40/16, 4" exhaust, 6X.018 sticks, rear air ride suspension
User avatar
Philip
14mm rotor
 
Posts: 1954
Joined: Mon Jan 08, 2007 10:50 am
Location: Indiana
Top

Re: Dana 70 yoke, ujoint/strap kit, pinion seal part #'s

Postby BCOWANWHEELS » Sun Dec 25, 2011 11:30 pm

I was told by a spicer rep that the reason spicer got away from u-bolts is because everybody tightened them too much and it was causeing u-joint failures " i diss-like the straps personally but what can you do " ?
I BELIEVE IN JOHN 3:16
BCOWANWHEELS
fuel pin?
 
Posts: 9
Joined: Sun Dec 25, 2011 11:26 pm
Location: kingsport, tn,
Top


Return to Part numbers (old,new,cross reference)

Who is online

Users browsing this forum: No registered users and 1 guest

cron