Spicer U Joint part #'s for every joint on a W250?

Moderators: Greenleaf, BC847, Richie O

Spicer U Joint part #'s for every joint on a W250?

Postby Bookshelf » Sat Sep 29, 2007 9:51 am

I was wondering if anyone had a # for every joint, front and rear driveshafts and steering knuckle. Thanks for any help.
91.0 W250 Auto
90 Chevy V30
Bookshelf
fuel screw!!!!
 
Posts: 173
Joined: Sat Jan 27, 2007 5:02 pm
Location: Medinah, IL

Postby Makaio » Thu Nov 29, 2007 10:39 pm

Well..... the Spicer u-joints are 5-160X and the NAPA numbers are 210-0160. Sorry, I don't have the front numbers.

Aloha,
Matt
Matt
1992 W250 auto, ASA/AFE intake, H1C hybrid 60-16, Bosch 190's, Bully Dog fuel pin, 366 spring, modified pump and a 4" turbo back exhaust. Suncoast valve body plumbing 3.54's w/LSD. Autometer gauges.
User avatar
Makaio
fuel screw!!!!
 
Posts: 47
Joined: Wed Sep 05, 2007 9:39 pm
Location: Waiahole, Hawaii (island of Oahu)

Postby CAJUN 93 » Fri Nov 30, 2007 7:50 am

i dont know if this helps but the oe number for a 7290 joint is #4504575
list $50.25 ea, trade $40.20 ea

as a btw, the factory 7290 joint show without a grease fitting, the 7260 has one.

daryl
93 d350 5spd 3.54-bhaf,stg iv,banks intercooler,bosch185,16cm,pacbrake,4" straight exh,pump mods,366 spring,leece-neville alt.
hers- 93 d250 auto 3.54- pump mods only
ours- 93 w350 dually, auto, 3.54. stock for now
parts 93 d350 auto, 92 d250 auto.
User avatar
CAJUN 93
14mm rotor
 
Posts: 545
Joined: Tue Jan 09, 2007 9:53 am
Location: southeast luziana
Top

Postby BC847 » Sun Dec 16, 2007 8:09 am

There are a few options for the Spicer wheel joints:
Forged with zerk-SPL55-4X
Forged w/o zerk-5-806X
Old school cast 5-332X

:)
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 1929
Joined: Wed Jan 03, 2007 5:22 pm
Top

Postby bgilbert » Tue Dec 18, 2007 12:18 pm

How about the carrier bearing? Is this a Timken/Napa/etc bearing or is there a Spicer carrier bearing available?

Edit: Spicer carrier bearing for 1st gen 2 piece drive shaft be it 5 speed regular cab 2wd or extended cab long bed is: 210140-1X. Was about $45 vs. $61 for NAPA version.
bgilbert
14mm rotor
 
Posts: 2253
Joined: Wed Jan 03, 2007 5:04 pm
Location: Terre Haute, Indiana
Top

Re: Spicer U Joint part #'s for every joint on a W250?

Postby ofelas » Mon May 04, 2015 4:40 pm

Front axle - Spicer Life SPL-553-X two
Front shaft - Front Joint - Spicer Life 5-811X one
Front shaft - Center & Rear Joint - Spicer Life 5-795X - one each
Front shaft CV Joint kit - Spicer Life - 211009X - one
Rear shaft - Front & Rear - Spicer Life 5-811x two
R12 = liquid bilit
ofelas
fuel screw!!!!
 
Posts: 74
Joined: Mon May 04, 2015 4:02 pm
Location: ON & TX
Top

Re: Spicer U Joint part #'s for every joint on a W250?

Postby Bookshelf » Tue May 05, 2015 7:45 am

ofelas wrote:Front axle - Spicer Life SPL-553-X two
Front shaft - Front Joint - Spicer Life 5-811X one
Front shaft - Center & Rear Joint - Spicer Life 5-795X - one each
Front shaft CV Joint kit - Spicer Life - 211009X - one
Rear shaft - Front & Rear - Spicer Life 5-811x two

Where were you able to get those numbers? And are the front numbers from 93 or earlier. I have found 93's have at least a bigger joint at the front driveshaft to diff joint, not sure about the cv
91.0 W250 Auto
90 Chevy V30
Bookshelf
fuel screw!!!!
 
Posts: 173
Joined: Sat Jan 27, 2007 5:02 pm
Location: Medinah, IL
Top

Re: Spicer U Joint part #'s for every joint on a W250?

Postby ofelas » Tue May 05, 2015 7:55 am

Hi I called Spicer (Dana) and got those numbers for my 91.5
R12 = liquid bilit
ofelas
fuel screw!!!!
 
Posts: 74
Joined: Mon May 04, 2015 4:02 pm
Location: ON & TX
Top

Re: Spicer U Joint part #'s for every joint on a W250?

Postby Collers9640 » Sat Sep 19, 2015 8:42 pm

I was doing some research on the 5-811x part number and found that the cup size is 1.126 when I went out and measured some on an old 2wd drive I have out back I got 1.188.
So I checked out the Dana spicer site and found the at the diesel size is 1.188 for the three rear drive shaft u-joints.

So the part numbers are like this
5-811x. 1.126 -wrong size. (I'm sure it's fits but would be loose and sloppy)

Spicer #. 5-160x 1.188
Spicer Life # 5-1410x. 1.188

Here's the link to check it out

http://www2.dana.com/expertforms/dek350.aspx
1990 W250 Cummins-7.3 PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, 4" intake, Amsoil BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1995 2500 4x4 Cummins
1984 D350 Crew Cab
Collers9640
fuel screw!!!!
 
Posts: 143
Joined: Wed Feb 24, 2010 4:25 pm
Location: Charleston SC
Top


Return to Part numbers (old,new,cross reference)

Who is online

Users browsing this forum: No registered users and 2 guests