Fast ve pump trucks....

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

Fast ve pump trucks....

Postby Cnp22 » Mon Mar 21, 2011 9:03 am

Just looking to see what the ve truck are running. Who's the fastest? If there is already a thread started please point me to it. Post up your 1/8th 1/4 times 2wd or 4wd? Auto or manual? Mods?
1992 auto, pump mods, 5x16's, 66/74, 8.9 1/8th
1992 getrag, p-pump, 540hp 1300fttq, 8.4 1/8th, 13.2 1/4
User avatar
Cnp22
fuel screw!!!!
 
Posts: 36
Joined: Tue Apr 20, 2010 11:22 pm

Re: Fast ve pump trucks....

Postby KTA » Mon Mar 21, 2011 5:49 pm

I am one of the fastest, but there are lots of them that are quicker.
Fleet of Junk: 1989 D350 627rwhp 1300 tq B-1/Hx60 twins, KTA pump/injectors, ported head, BIG fuel supply. 13.75@ 109.5mph 1/4: 1992 W350 Cab-chasis, 1993 W350 ext cab cust.370 inj Hx40/16cm 290rwhp hydroboost brakes,1984 D350 crew-cab another project.
User avatar
KTA
diesel guru/mod
 
Posts: 1855
Joined: Thu Jan 04, 2007 2:23 pm
Location: Shelby County, Ky

Re: Fast ve pump trucks....

Postby dazedandconfused » Mon Mar 21, 2011 6:38 pm

That nova runs mid 11's.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: Fast ve pump trucks....

Postby BC847 » Mon Mar 21, 2011 7:28 pm

My mess is fairly quick for what it is.
'93 W250 Clubcab @ 6400lbs. 12mm VE, 6x.016 EDMs, S362/HT3B, A518

At 15' elevation (10/22/10):
1.69 60'
5.09 330'
8.01 1/8 @ 83.44
12.81 1/4 @ 101.11
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2203
Joined: Wed Jan 03, 2007 5:22 pm
Top

Re: Fast ve pump trucks....

Postby Cnp22 » Mon Mar 21, 2011 9:14 pm

That's pretty quick! Forgot to add my time I ran a 8.9 at 76mph last Sunday my mods are pump tunning, 5x16's, CAT turbo 66/74 all thru a stock rebuilt auto that has around 7,000 miles on the rebuild.
1992 auto, pump mods, 5x16's, 66/74, 8.9 1/8th
1992 getrag, p-pump, 540hp 1300fttq, 8.4 1/8th, 13.2 1/4
User avatar
Cnp22
fuel screw!!!!
 
Posts: 36
Joined: Tue Apr 20, 2010 11:22 pm
Top

Re: Fast ve pump trucks....

Postby ahale2772 » Thu Mar 24, 2011 6:20 am

66/74....YIKES thats a biggin
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts
Top

Re: Fast ve pump trucks....

Postby Cnp22 » Thu Mar 24, 2011 2:00 pm

It's pretty big but it lites up awsome.

Image
1992 auto, pump mods, 5x16's, 66/74, 8.9 1/8th
1992 getrag, p-pump, 540hp 1300fttq, 8.4 1/8th, 13.2 1/4
User avatar
Cnp22
fuel screw!!!!
 
Posts: 36
Joined: Tue Apr 20, 2010 11:22 pm
Top

Re: Fast ve pump trucks....

Postby BC847 » Thu Mar 24, 2011 3:27 pm

How long did the blue paint last? :mrgreen:
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2203
Joined: Wed Jan 03, 2007 5:22 pm
Top

Re: Fast ve pump trucks....

Postby Cnp22 » Thu Mar 24, 2011 4:25 pm

BC847 wrote:How long did the blue paint last? :mrgreen:


About 5 mins lol it was a spare one I had laying a round I was slowly porting it out and I painted it to keep it from rusting while it was on the shelf.
1992 auto, pump mods, 5x16's, 66/74, 8.9 1/8th
1992 getrag, p-pump, 540hp 1300fttq, 8.4 1/8th, 13.2 1/4
User avatar
Cnp22
fuel screw!!!!
 
Posts: 36
Joined: Tue Apr 20, 2010 11:22 pm
Top

Re: Fast ve pump trucks....

Postby ciamcoop » Fri Mar 25, 2011 4:48 am

6400 lbs? I'm wondering what I have buried in my toolbox now. With a 1/4 tank of fuel, my 80 lb lab, my 4 year old and me I weighed 7380 lbs. Thought it looked like it's been riding low..... that must be why I'm not running 13's
'93 W250LE 4x4 club cab, getrag, denny t, 366 spring, 181/210 cam, bored. 020, KDP, 5x.014's, piston pump, 4" tbe, cold air, 255/85/16s, 3.54's one wheeler peeler
User avatar
ciamcoop
fuel screw!!!!
 
Posts: 142
Joined: Sun Jun 13, 2010 11:35 pm
Location: Central Point, OR
Top

Re: Fast ve pump trucks....

Postby c12h26 » Fri Mar 25, 2011 6:58 pm

My quickest et is 12.56@106. that was with 3.07 rear 727 trans and he351ve,over the winter i put in a rebuilt 518, 3.54 rear, and a HX52.I hope to run in the high 11s with this setup. truck only weighs 4700 with me in it
1991 D250 reg. cab 518
4" turbo back,pump turned up,bumped timing,intercooler,HX52,366 spring,ground AFC lever,piston lift pump,Goerend converter,M/T ET street radials,nitrous,lowered.
User avatar
c12h26
fuel screw!!!!
 
Posts: 60
Joined: Tue Jul 31, 2007 7:07 pm
Location: Rising Sun Maryland
Top

Re: Fast ve pump trucks....

Postby Cnp22 » Fri Mar 25, 2011 11:27 pm

Thats a good time! How much are you spraying?
1992 auto, pump mods, 5x16's, 66/74, 8.9 1/8th
1992 getrag, p-pump, 540hp 1300fttq, 8.4 1/8th, 13.2 1/4
User avatar
Cnp22
fuel screw!!!!
 
Posts: 36
Joined: Tue Apr 20, 2010 11:22 pm
Top

Re: Fast ve pump trucks....

Postby c12h26 » Sat Mar 26, 2011 4:59 am

.125 jet
1991 D250 reg. cab 518
4" turbo back,pump turned up,bumped timing,intercooler,HX52,366 spring,ground AFC lever,piston lift pump,Goerend converter,M/T ET street radials,nitrous,lowered.
User avatar
c12h26
fuel screw!!!!
 
Posts: 60
Joined: Tue Jul 31, 2007 7:07 pm
Location: Rising Sun Maryland
Top

Re: Fast ve pump trucks....

Postby JQmile » Sat Mar 26, 2011 9:45 am

SO far I'm fast, but not quick.....10.28@82.3mph in the 1/8th. Couldn't spool/no traction. 2.96 60ft. Going back soon with nitrous and slicks :mrgreen: According to the weight/hp of my truck, mid to high 11s should be possible on nitrous, it's just that getting there is another matter.
1989 D250 2wd. Scheid 14mm VE pump and 5x25's, J&H Performance 47RH trans with Suncoast manual valvebody, dual wastegates, 62/65/14 S300, NX Dual Stage nitrous, 487 on fuel, 972 on the jug.
JQmile
14mm rotor
 
Posts: 626
Joined: Mon Dec 03, 2007 10:44 pm
Location: Los Angeles, CA
Top

Re: Fast ve pump trucks....

Postby Cnp22 » Sat Mar 26, 2011 12:58 pm

Traction is key! I ran a 9.3 with stock everything but Pump tuning and 5x16's on some old farm tires and a 9.1 on slicks. If you can get off the line good and get about a 1.8 60' time mid 8's shouldn't be a problem high 11's in the 1/4. I ran the 8.9 with a 2.1 60' time and a .445 reaction time and I'm in a heavier truck with half the power. Get some good slicks and you'll be set!
1992 auto, pump mods, 5x16's, 66/74, 8.9 1/8th
1992 getrag, p-pump, 540hp 1300fttq, 8.4 1/8th, 13.2 1/4
User avatar
Cnp22
fuel screw!!!!
 
Posts: 36
Joined: Tue Apr 20, 2010 11:22 pm
Top

Next

Return to Competition

Who is online

Users browsing this forum: No registered users and 12 guests

cron