Dyno Graphs 2003-2010

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:03 pm

Here are some of my dyno graphs that I have saved over the years. I thought that some of you might enjoy looking at them. I have rouphly 88 pages so this is going to take some time to get them all posted. Its not all of them, but these were the ones that I found in my dyno file.

Stomp
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:06 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:12 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:16 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:18 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:20 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:21 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:26 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:29 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:30 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:33 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:35 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:51 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:53 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Re: Dyno Graphs 2003-2010

Postby Stomp » Fri Apr 29, 2011 9:56 pm

more
You do not have the required permissions to view the files attached to this post.
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

Next

Return to Competition

Who is online

Users browsing this forum: No registered users and 13 guests

cron