New Play toy

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

New Play toy

Postby ryanihf250 » Wed Aug 08, 2007 6:30 pm

Image :twisted:
Image


This is my new toy that I got this Saturday! 92 Dodge 350 Cummins 4x4 with a six inch Skyjacker lift, 35x12.50 Interco Thornbirds. Only thing that was really wrong with it was that he broke the front drive shaft. I am wanting to make it into a street puller. My ford has done real well in the street class, but I always wanted a Cummins pull truck so I won't ruin my daily driver. I can't believe it only weighs 6,300lbs with me in it. I love it, 1/2 ton trucks watch out! I have never owned a Dodge pickup but I run the 5.9 Cummins everyday in all our logging equipment! I have alot of questions if yall don't mind answering them.

-What parts do I need to make BHAF?
-Does anybody sell a kit for dual stacks for the 1st gen or do I have to put one together?
-Does anyone have pictures of their ladder bars, I have 5in blocks in rear?
-Does anyone have pictures and explaination of how to turn up the Ve pump?
Playtoy:1992 Dodge 350 4x4 SRW Cummins. 6in lift, 35in Pro Comp X , Dana 80 swap 4:10 Pump maxed, BHAF, 6x16inj, 3200 GSK, Piston Lift Pump, II SPS turbo.Street Pulling truck project. www.libertyantiquetractorpull.com
ryanihf250
fuel screw!!!!
 
Posts: 30
Joined: Mon Aug 06, 2007 7:26 pm
Location: White Plains, GA

Re: New Play toy

Postby oldestof11 » Wed Aug 08, 2007 8:11 pm

ryanihf250 wrote:-What parts do I need to make BHAF?
-Does anybody sell a kit for dual stacks for the 1st gen or do I have to put one together?
-Does anyone have pictures of their ladder bars, I have 5in blocks in rear?
-Does anyone have pictures and explaination of how to turn up the Ve pump?


1. Don't know

2. I got mine at blackclouddiesel.com Very good service. iowa80.com is a little cheaper but do not sell kits. You just need to make sure you have the clamps, elbows, piping, and not to forget the stacks :wink:

3. Same as #1

4. Here you go: http://www.dieseltruckresource.com/dev/ ... stcount=10 Everything you need to know on making power in this truck. MAKE SURE TO READ ABOUT RUNAWAYS! We do not want you to hurt your new truck.

Glad you got a 1st GEN. I just pulled with mine. You may need to add some weight.

Jon
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois

Postby KTA » Thu Aug 09, 2007 6:37 am

If you pull on clay tracks and end up making anypower you can either lose the lift or break alot of drivetrain parts.
Fleet of Junk: 1989 D350 627rwhp 1300 tq B-1/Hx60 twins, KTA pump/injectors, ported head, BIG fuel supply. 13.75@ 109.5mph 1/4: 1992 W350 Cab-chasis, 1993 W350 ext cab cust.370 inj Hx40/16cm 290rwhp hydroboost brakes,1984 D350 crew-cab another project.
User avatar
KTA
diesel guru/mod
 
Posts: 1855
Joined: Thu Jan 04, 2007 2:23 pm
Location: Shelby County, Ky
Top


Return to Competition

Who is online

Users browsing this forum: No registered users and 10 guests

cron