1st Gen 1/4 Mile times

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

1st Gen 1/4 Mile times

Postby oldestof11 » Sat Oct 29, 2011 3:08 pm

List what you have and post up the pic of the slip or type it out.

Truck is a 5spd, 4.10's, aluminum 16.5's with 33x12.5, VE molested by me, DennyT Stage 1 AFC pin, 4k spring, near dead LP, rebuilt stock injectors, stock H1C turbo with 18cm housing...

My AFC reference line decided to bust on me on the 1st run. So I replaced the pin with the DennyT, only hitting 22psi, I ran my best. The stock pin at its deepest setting I was hitting 30psi but only running 16.4's...

My best today was 15.991 @ 82.44mph.

My ticket reads:

R/T .344
60' 2.124 8)
330 6.441
1/8 10.108
MPH 67.20
1000 13.271
1/4 15.991
MPH 82.44

My best R/T was .154 and best 60' was 2.124. I was cutting 2.1x to 2.22 60's all day.

I hate the shift into 3rd gear. :roll: Also, on 1 run, I missed 5th but still managed a 16.1xx... Makes me wonder. When I ran and just kept it in 4th, I ran 16.7xx and RPM's were about 32xx
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois

Re: 1st Gen 1/4 Mile times

Postby PToombs » Sun Oct 30, 2011 4:10 pm

Not bad Jon. I ran a 14.6 and a 14.9 last summer. I missed the shift to 3rd on the 2nd run, then it spun when I did get it in. Not bad for a 1 wheel peel. I have a slip around here someplace, good luck on finding it though! :lol: I'd like to try again with my LSD, maybe next year.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11146
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!

Re: 1st Gen 1/4 Mile times

Postby RumbleFish » Mon Oct 31, 2011 5:45 pm

ooo, I wanna race!
I could've left it stock...but why?
User avatar
RumbleFish
14mm rotor
 
Posts: 2643
Joined: Thu Jan 11, 2007 1:19 pm
Location: state of confusion - Decatur, IN
Top

Re: 1st Gen 1/4 Mile times

Postby PToombs » Wed Nov 02, 2011 5:46 pm

NFW!, I heard you leave, and I distinctly remember somebody saying "300hp", and your car weighs what, 1500lbs? :lol:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11146
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: 1st Gen 1/4 Mile times

Postby Tacoclaw » Wed Nov 02, 2011 5:53 pm

You might be able to get him off the line. He does have wrong wheel drive. :mrgreen:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4090
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: 1st Gen 1/4 Mile times

Postby RumbleFish » Wed Nov 02, 2011 6:39 pm

I think that somebody might have maybe possibly could have said 300whp. I wasn't there, so I don't know for sure. Actually I'm pretty impressed at your 14.6 with a getrag. I'm sure if you had a nv4500 you'd be in 13s since they seem to shift alot smoother/quicker in my experience.

And ya, it's wrong wheel drive fo sho. My 60' times are terrible, but I refuse to put slicks on it.
I could've left it stock...but why?
User avatar
RumbleFish
14mm rotor
 
Posts: 2643
Joined: Thu Jan 11, 2007 1:19 pm
Location: state of confusion - Decatur, IN
Top

Re: 1st Gen 1/4 Mile times

Postby Tacoclaw » Wed Nov 02, 2011 6:41 pm

RumbleFish wrote:I refuse to put slicks on it.


Good, you can save the money you'd spend on CV shafts and put it into your truck. :mrgreen:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4090
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: 1st Gen 1/4 Mile times

Postby RumbleFish » Thu Nov 03, 2011 8:17 am

Tacoclaw wrote:
Good, you can save the money you'd spend on CV shafts and put it into buying another diesel instead of fixing that rustbucket gashog of a ramcharger :mrgreen:


Fixed!
I could've left it stock...but why?
User avatar
RumbleFish
14mm rotor
 
Posts: 2643
Joined: Thu Jan 11, 2007 1:19 pm
Location: state of confusion - Decatur, IN
Top

Re: 1st Gen 1/4 Mile times

Postby PToombs » Thu Nov 03, 2011 4:49 pm

I think we boned the heck out of Jons thread. Sorry Jon! :lol:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11146
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: 1st Gen 1/4 Mile times

Postby PToombs » Thu Nov 03, 2011 5:01 pm

I found my slips, already on the 'bucket! 8) I guess I lied, 16.4 and a 16.5 ET. Isn't it funny how the mind changes things? I coulda swore that I was in the 14's. :oops:
Image
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11146
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: 1st Gen 1/4 Mile times

Postby Tacoclaw » Thu Nov 03, 2011 5:22 pm

No doubt, sorry about the thread wreckage. :lol:

We don't have a 1/4 mile track around here, but I ran a 10.2 in our 1/8th. That was back with just the 62mm turbo. The Getrag was being pretty rude to my front axle. :lol:
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4090
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: 1st Gen 1/4 Mile times

Postby oldestof11 » Thu Nov 03, 2011 5:57 pm

10.2 1/8 is around 15's in the 1/4.

Pete, don't talk about boning again. We know you have a fetish. :roll:
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: 1st Gen 1/4 Mile times

Postby BC847 » Thu Nov 03, 2011 8:18 pm

This was last year at a track that's at 15' elevation.

Image

I'm usually a tenth of a second or so slower a my regular local 1/8th mile track which is at 250ish feet elevation.

Just ran the 1/8th in 8.07 tonight at the local track (so close to 7.xx it's irritating LOL). That should result in a little quicker at that 15' 1/4th mile track with the better air. 12.7ish?

>Giggity< 8)
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 1973
Joined: Wed Jan 03, 2007 5:22 pm
Top

Re: 1st Gen 1/4 Mile times

Postby oldestof11 » Fri Nov 04, 2011 6:16 pm

Nice Dave! I can't wait till I get that fast.

Just curious, if you stripped it down to nothing, what your time might be... 11's?
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: 1st Gen 1/4 Mile times

Postby JQmile » Sun Feb 05, 2012 3:17 am

Just ran 13.1 at 118mph on one stage of nitrous....2.3 60ft :(

Once I work on the front half of my timeslip, things should get fast in a hurry. For reference, buddy of mine at the track ran an 11.1 at 121mph, so the power is there, I just need traction. Locker, Cal-Tracs, etc. are coming soon 8)
1989 D250 2wd. Scheid 14mm VE pump and 5x25's, J&H Performance 47RH trans with Suncoast manual valvebody, dual wastegates, 62/65/14 S300, NX Dual Stage nitrous, 487 on fuel, 972 on the jug.
JQmile
14mm rotor
 
Posts: 625
Joined: Mon Dec 03, 2007 10:44 pm
Location: Los Angeles, CA
Top

Next

Return to Competition

Who is online

Users browsing this forum: No registered users and 2 guests