500+ 12mm VE fuel only

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

Re: 500+ 12mm VE fuel only

Postby CumminsPower59 » Thu Jan 09, 2014 10:58 am

I'm thinking if you could somehow plumb it in, kind of like nitrous or something, but be able to get a f'ton of volume...a welding 02 cylinder would be a good place to start...even if you could just get a small percentage, still better than none.
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!

Re: 500+ 12mm VE fuel only

Postby RCCUMMINS89 » Thu Jan 09, 2014 11:00 am

LOL......it'd be like throwing in a double correction factor.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID

Re: 500+ 12mm VE fuel only

Postby DMan1198 » Thu Jan 09, 2014 1:15 pm

What if you used the liquid stuff, like in rockets. Then you'd get the benefits of a cooler air charge, and more oxygen
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: 500+ 12mm VE fuel only

Postby RCCUMMINS89 » Thu Jan 09, 2014 1:33 pm

OOOOOOOOOOOHHHHHHHHHHHHHHH..............I like it when you talk dirty. :lol:



I totally butchered another man's thread............AGAIN....... Sorry :oops:
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: 500+ 12mm VE fuel only

Postby DMan1198 » Thu Jan 09, 2014 2:59 pm

Admittedly that did happen, but I think I probably started the decline with my question about the cam plate
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: 500+ 12mm VE fuel only

Postby BC847 » Thu Jan 09, 2014 4:16 pm

In all seriousness, I like to think that, with some upgrades and weird (relatively) tuning I've been recently messing with, I may just get a little closer this year.

Sure hope it doesn't Image
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2203
Joined: Wed Jan 03, 2007 5:22 pm
Top

Re: 500+ 12mm VE fuel only

Postby RCCUMMINS89 » Thu Jan 09, 2014 4:25 pm

I was once told by someone that I tend to agree with (rare I know)...... that 400hp on a ve pump, the engine feels the same as 600hp on a p pump. It's only a matter of time, but think of it this way.... the more wore out it is, the more fuel and air you can jam into it. :mrgreen:
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: 500+ 12mm VE fuel only

Postby DMan1198 » Thu Jan 09, 2014 4:45 pm

BC847 wrote:In all seriousness, I like to think that, with some upgrades and weird (relatively) tuning I've been recently messing with, I may just get a little closer this year.

Sure hope it doesn't Image

I'm sure everyone hopes it doesn't do that
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: 500+ 12mm VE fuel only

Postby RCCUMMINS89 » Thu Jan 09, 2014 4:53 pm

x2
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: 500+ 12mm VE fuel only

Postby PToombs » Thu Jan 09, 2014 6:08 pm

I thought Bill had done 505 on fuel, but I wasn't sure and don't have the time to go searching for the info on it.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: 500+ 12mm VE fuel only

Postby RCCUMMINS89 » Thu Jan 09, 2014 6:22 pm

With his 14.....
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: 500+ 12mm VE fuel only

Postby JD91 » Fri Jan 10, 2014 8:38 am

Ill be doing a little more tuning today and over the weekend as well. Hoping to run my fuel screw in a bit and gonna skip a tooth.
91 w250 RC, getrag, 4in turbo back diamond eye
93 D350 CC, getrag, 4in diamond eye, 60# springs,3200 gov,arp's,fass 150,fass sump, BD SUPER B 58MM, 5x14 sticks, M&H timing spacer, cut fuel pin,valair clutch, auto meter pyro & boost......she screams!!
91.5 d350 RC, getrag, cut fuel pin, no bed lol "the beater"
75 dodge club cab swb flat bed 4x4 "gasser" on 37's
User avatar
JD91
fuel screw!!!!
 
Posts: 105
Joined: Mon Oct 17, 2011 6:21 pm
Location: Castroville, TX
Top

Re: 500+ 12mm VE fuel only

Postby 1STGENFARMBOY » Fri Jan 10, 2014 3:47 pm

DMan1198 wrote:
BC847 wrote:In all seriousness, I like to think that, with some upgrades and weird (relatively) tuning I've been recently messing with, I may just get a little closer this year.

Sure hope it doesn't Image

I'm sure everyone hopes it doesn't do that




I hope it holds together David...your truck is my hero. :lol: :lol: :lol:
93 W250 STD CAB, AUTO 3.55, GAUGES, 80HP DDP STICKS, DENNY T ,16CM HOUSING, 60MM GILLETT, VE MAXED,BHAF, BHFF, 366 SPRING,P/S INTERCOOLER, TIMS COOLER TUBS, TIMMING 1/8 BUMP,4in TURBO BACK TO DUEL 5IN STACKS,33 12.50 BFG, HOLLEY BLACK, CONVERTER COOMING.
User avatar
1STGENFARMBOY
14mm rotor
 
Posts: 2089
Joined: Mon Sep 28, 2009 2:23 pm
Location: PITTSBURG ILL
Top

Re: 500+ 12mm VE fuel only

Postby BC847 » Fri Jan 10, 2014 4:28 pm

Ah, shucks, It's all smoke a mirrors you know.
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2203
Joined: Wed Jan 03, 2007 5:22 pm
Top

Re: 500+ 12mm VE fuel only

Postby Stomp » Fri Jan 10, 2014 6:14 pm

Well I just so happen to have a 12mm pump hanging on my old Fist Gen right now so count me in. Doesnt mean very much because back in 2004-2005 when I ditched the 12mm I was only able to coach 439hp out of it with fuel only. Of course I used that head and rotor and built a brand new pump and was able to increase the output by 40cc of fuel and then I never ever put it on to see how it did. Now is my chance.

I have a water leak coming out of the top of my head so I have to fix it first before I can even start playing again. I have a good used head just sitting at a friends shop so all I have to do is make the time to go and pick it up and fix the old girl, but its been sitting for what 2+years now. 2 motors later and now a leaking head I might have put 100 miles on this motor before I parked it again after finishing the twins on my 06.

Oh well all I really need is some motivation to get it back up and running. So keep up the good work guys I might have a coal or two started under me now. :bom:

Stomp
93W250CTD,7 isspro gauges,Piers stage 2+ ported/polished/o-ringed head,ARP 12mm studs,ATS 3 piece,Custom twins by Brad @ Ponci's Diesel Center BTH3B/26 w/Piers HX40/16, custom 4"exhaust/ intake by Brad@ PDC,370's,KTA-Special 14mm Head/Rotor
Stomp
fuel screw!!!!
 
Posts: 74
Joined: Tue Nov 27, 2007 12:19 pm
Location: Nor-CAL
Top

PreviousNext

Return to Competition

Who is online

Users browsing this forum: No registered users and 13 guests