Max hp from stock I/c injectors?

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

Max hp from stock I/c injectors?

Postby Dan NJ » Sun Sep 07, 2014 9:12 am

So I used the search and turned up nothing, maybe I'm dumb and doing it wrong but I'm curious as to what is the max hp seen on stock injector? I'm kinda rolling the idea around of running a hx35 with gds 60mm wheel on my truck with stock injectors and turning the pump up. I'm really trying to gain hp without a ton of smoke.
Dan NJ
fuel screw!!!!
 
Posts: 46
Joined: Sat Sep 06, 2014 7:19 pm

Re: Max hp from stock I/c injectors?

Postby oldestof11 » Sun Sep 07, 2014 4:29 pm

My rebuilt injectors put me at 15.5x at 84-85mph. At 6100 lbs, it's 250-260 at the rear wheels. I'm sure it'd be more if I had a real lift pump on it.
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois

Re: Max hp from stock I/c injectors?

Postby CumminsPower59 » Sun Sep 07, 2014 10:50 pm

IIRC, RC made 414 on honed stock IC sticks ;)
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: Max hp from stock I/c injectors?

Postby AHineman » Sun Sep 07, 2014 11:09 pm

Honed ≠ stock.
Andrew

Owner of two old 1stgens and not much else.
AHineman
14mm rotor
 
Posts: 1364
Joined: Tue Aug 11, 2009 7:15 pm
Location: Crown City, Ohio
Top

Re: Max hp from stock I/c injectors?

Postby oldestof11 » Mon Sep 08, 2014 4:37 am

But it shows the potential.
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: Max hp from stock I/c injectors?

Postby fatty » Mon Sep 08, 2014 5:01 am

I made 283/512 a few years ago.
91.5 w250
fatty
14mm rotor
 
Posts: 802
Joined: Tue Nov 04, 2008 8:52 pm
Location: Washington
Top

Re: Max hp from stock I/c injectors?

Postby AHineman » Mon Sep 08, 2014 5:29 am

Stock is stock. Modified is not stock.....

Edm, honing, whatever.
Andrew

Owner of two old 1stgens and not much else.
AHineman
14mm rotor
 
Posts: 1364
Joined: Tue Aug 11, 2009 7:15 pm
Location: Crown City, Ohio
Top

Re: Max hp from stock I/c injectors?

Postby Dan NJ » Mon Sep 08, 2014 9:50 am

Thanks guys, I'm not trying to get too crazy because when I did with my other cummins trucks it just got really expensive real fast
Dan NJ
fuel screw!!!!
 
Posts: 46
Joined: Sat Sep 06, 2014 7:19 pm
Top

Re: Max hp from stock I/c injectors?

Postby DMan1198 » Mon Sep 08, 2014 11:05 am

Iirc getting a set of nozzles extrude honed runs about $200. I haven't looked into stock replacement injector prices, but that'd be a pretty good budget friendly choice IMO
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: Max hp from stock I/c injectors?

Postby RCCUMMINS89 » Tue Sep 09, 2014 10:21 pm

Stock will do about 300. And yes honing adds allot of power for cheap. We will hone them for 250
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Max hp from stock I/c injectors?

Postby Jonnylightening » Tue Oct 14, 2014 4:57 am

RCCUMMINS89 wrote:Stock will do about 300. And yes honing adds allot of power for cheap. We will hone them for 250


Soon as I get some cash flowin in im gunna see you bout a set of injectors
Jonnylightening
fuel screw!!!!
 
Posts: 27
Joined: Sun Aug 03, 2014 4:31 pm
Top


Return to Competition

Who is online

Users browsing this forum: No registered users and 7 guests