0-60 vids??!?!

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

0-60 vids??!?!

Postby spencerdiesel » Mon Nov 02, 2015 4:24 pm

Hey wasn't real sure where to post this but, who's got acceleration vids of their trucks? EGT shots, 0-60 ect...
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC

Re: 0-60 vids??!?!

Postby BC847 » Mon Nov 02, 2015 5:22 pm

David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2203
Joined: Wed Jan 03, 2007 5:22 pm

Re: 0-60 vids??!?!

Postby Tacoclaw » Mon Nov 02, 2015 7:49 pm

1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: 0-60 vids??!?!

Postby fatty » Mon Nov 02, 2015 8:29 pm

Here's mine. Mods are in the YouTube description.https://youtu.be/h9MVdn9lgXg
91.5 w250
fatty
14mm rotor
 
Posts: 802
Joined: Tue Nov 04, 2008 8:52 pm
Location: Washington
Top

Re: 0-60 vids??!?!

Postby spencerdiesel » Tue Nov 03, 2015 2:40 pm

Awesome, ridiculous power to be seen on this thread! Thanks much, BC your truck looks awesome in the diesel power mag.
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: 0-60 vids??!?!

Postby spencerdiesel » Tue Nov 03, 2015 4:47 pm

Hey RC you got any vids of the 24v motor?
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: 0-60 vids??!?!

Postby spencerdiesel » Fri Nov 06, 2015 6:04 pm

BC, watched your 12.67s pass. Truly impressed. Have you ever got to stretch the beast's legs before? what were EGT's like :lol:
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: 0-60 vids??!?!

Postby RCCUMMINS89 » Sat Nov 07, 2015 8:57 pm

I have no videos yet of the 24 valve engine. We are still working out bugs.

I've also got no vids of the old 12 valve, original engine. As a manual trans, big drive line angles, and 37" tires, I do not do off the line stuff...... I like things not to scatter.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: 0-60 vids??!?!

Postby spencerdiesel » Sun Nov 08, 2015 8:25 am

Not a problem, be neat to see a mild vid or two if you ever did them
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: 0-60 vids??!?!

Postby RCCUMMINS89 » Sun Nov 08, 2015 9:53 am

Hopefully can. Not sure when it will be running again.

Back when we first put the engine in, it didn't pump oil Swapped the oil pump, pulled and looked at the mains....looked ok. After 250 miles it is being pulled due to a knock. Sounds to me like a rod knock. However, I feel that it will be a simple, quick fix.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: 0-60 vids??!?!

Postby spencerdiesel » Sun Nov 08, 2015 11:16 am

I'm sorry to hear that man. Was the oil pump just defective? Is there a thread you've got on the 24v motor I can go to?
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: 0-60 vids??!?!

Postby RCCUMMINS89 » Sun Nov 08, 2015 1:57 pm

Thread? Not really. I didn't build the engine myself. I have an engine builder that I use. And apparently. Considering we swapped pumps and it immediately pumped oil.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: 0-60 vids??!?!

Postby spencerdiesel » Sun Nov 08, 2015 3:40 pm

Ok no big deal. I was just curious because some of my buds have told me they packed the pump with lubriplate/ grease (to prime it) before they installed, and it wouldn't pump oil. The thick lubricants didn't disperse and instead blocked oil flow. Just something I didn't know and figured others like me might find helpful.
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: 0-60 vids??!?!

Postby fatty » Sun Nov 08, 2015 4:31 pm

This is a 0-70. Poor quality, it was shot with an iPhone then sent to my android.

https://youtu.be/WD68l0Hagio
91.5 w250
fatty
14mm rotor
 
Posts: 802
Joined: Tue Nov 04, 2008 8:52 pm
Location: Washington
Top

Re: 0-60 vids??!?!

Postby spencerdiesel » Sun Nov 08, 2015 5:35 pm

Gah what a beast......does it break loose in 2wd when the turbo lights on damp pavement? Cuz it lights at about 30ish mph right?
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Next

Return to Competition

Who is online

Users browsing this forum: No registered users and 12 guests