My Hitch pic's and getting ready for first pull.

Sled-pulling, Drag results, Dyno results

Moderators: Greenleaf, KTA, BC847, Richie O

My Hitch pic's and getting ready for first pull.

Postby motorwood » Thu Jul 22, 2010 8:08 pm

My first pull ever will be this Saturday night. Not sure what gear to start the old Getrag and 3.54's in,gonna try 2nd low and see if she'll move.

http://www.facebook.com/album.php?aid=2 ... 3b5969fff8
'03 2500: utility body stock; '92 350 flatbed: maxed fuel, 354 spring, 6x.016's, 14mm H/R, 2.8plate, studs, springs, A1000 5/8 line, Super40 = 454hp 1080tq all fuel. Have added S3 66/74/.91, O-rings, home port job, Steedspeed t-4 manifold. Hp=437/857 :( 13mm P, 5x.025, he551+ht80 843hp 1thousand something trq. Broken 5th gear.
motorwood
fuel screw!!!!
 
Posts: 171
Joined: Wed Jun 09, 2010 5:30 am

Re: My Hitch pic's and getting ready for first pull.

Postby motorwood » Sun Jul 25, 2010 7:18 am

Hitch held , clutch didn't.
'03 2500: utility body stock; '92 350 flatbed: maxed fuel, 354 spring, 6x.016's, 14mm H/R, 2.8plate, studs, springs, A1000 5/8 line, Super40 = 454hp 1080tq all fuel. Have added S3 66/74/.91, O-rings, home port job, Steedspeed t-4 manifold. Hp=437/857 :( 13mm P, 5x.025, he551+ht80 843hp 1thousand something trq. Broken 5th gear.
motorwood
fuel screw!!!!
 
Posts: 171
Joined: Wed Jun 09, 2010 5:30 am

Re: My Hitch pic's and getting ready for first pull.

Postby Richie O » Mon Jul 26, 2010 2:57 pm

For future reference ,,,, we love videos. :D
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: My Hitch pic's and getting ready for first pull.

Postby Farmboy » Fri Jul 30, 2010 9:43 am

what gear did you end up running?
1990 W350 4X4 NOW INTERCOOLED 5-speed. Boost/Pyro. Few light tweaks to the pump. Now a dually with an aluminum flatbed!!
User avatar
Farmboy
14mm rotor
 
Posts: 620
Joined: Wed Dec 17, 2008 11:47 am
Location: Between the corn fields of Ohio
Top

Re: My Hitch pic's and getting ready for first pull.

Postby motorwood » Sat Aug 07, 2010 7:49 am

2nd low, I'm out of commission till I get a new clutch
'03 2500: utility body stock; '92 350 flatbed: maxed fuel, 354 spring, 6x.016's, 14mm H/R, 2.8plate, studs, springs, A1000 5/8 line, Super40 = 454hp 1080tq all fuel. Have added S3 66/74/.91, O-rings, home port job, Steedspeed t-4 manifold. Hp=437/857 :( 13mm P, 5x.025, he551+ht80 843hp 1thousand something trq. Broken 5th gear.
motorwood
fuel screw!!!!
 
Posts: 171
Joined: Wed Jun 09, 2010 5:30 am
Top

Re: My Hitch pic's and getting ready for first pull.

Postby motorwood » Thu Nov 04, 2010 7:13 am

<object width="320" height="240" ><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://www.facebook.com/v/1631142986185" /><embed src="http://www.facebook.com/v/1631142986185" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="320" height="240"></embed></object>


I dont know if this will get you to the video or not. This pull was in 3rd gear with a 30k lb sled 243 feet. Tried 2nd later in the 2.8 class went 249 feet.
'03 2500: utility body stock; '92 350 flatbed: maxed fuel, 354 spring, 6x.016's, 14mm H/R, 2.8plate, studs, springs, A1000 5/8 line, Super40 = 454hp 1080tq all fuel. Have added S3 66/74/.91, O-rings, home port job, Steedspeed t-4 manifold. Hp=437/857 :( 13mm P, 5x.025, he551+ht80 843hp 1thousand something trq. Broken 5th gear.
motorwood
fuel screw!!!!
 
Posts: 171
Joined: Wed Jun 09, 2010 5:30 am
Top


Return to Competition

Who is online

Users browsing this forum: No registered users and 12 guests

cron