I'm attempting to put together a "Bible" of Dana axle applications and info for our trucks.
I'll update it as I put info together, but first I have a few questions.
Wheel mounting surfaces, for SRW, DRW, and C&C. I don't know any of them and though an exhaustive search would probably answer at least one, I'm typing out a giant kcuf in Microsoft word. Please help.
Axle shaft lengths, SRW, DRW, C&C.
Like I said, I'll update with more questions and info as I go along.
___________________________________________________________________________________________________________
What I've got so far, only 3.07 stuff. If anyone needs anything specific I can try to track it down on the Dana pages.
_________________________________________________________________________________________________________
1990 is a cut off date for 35 spline rear axles as far as I've found, any axles after '90 will have 32 spline axles,
if you have evidence otherwise, please let me know and I'll update with BOMs and part numbers.
Anything in parentheses is a part number, enter/find on this PDF for full specs.
Single wheel, D61FA front axle; 3.07 ratio, 35 spline carrier:
BOM: 610342-1
WMS:
Axleshaft length: Driver(907967-1):27.97" passenger(907967-2):47.20"
Single wheel, Dana 70-U2 rear axle; 3.07 ratio, 35 spline
Bom: Open carrier(605311-1) Pwrlok(605311-2)
WMS:
Axleshaft length: 34.24" equal on both sides(35091-29)
Unknown layout, Dana 70-U2 rear axle; 3.07 ratio, 35 spline
BOM: (605313-1)____(605313-2) *both listed as open, same axles but different carrier kits. Unknown why yet*
WMS:
Axleshaft length: 36.94" equal on both sides(35091-4)
Single wheel, Dana 70-U2 rear axle; 3.07 ratio, 32 spline
BOM: Open carrier(605508-1) Pwrlok(605508-2)
WMS:
Axleshaft length: 34.24" equal on both sides(43811-1)
Unknown layout, dana70-U2 rear axle; 3.07 ratio, 32 spline
BOM: Open carrier(605510-1) Pwrlok(605510-2)
WMS:
Axleshaft length: 36.93" equal on both sides(43811-3)