Problem is that the 1410 yoke from the 205 has a larger diameter than the 13xx yoke from the 241. Does anyone know a part number for the seal that fits the 241 bore and the 205 1410 yoke?
A couple hours of googling hasn't gotten me anywhere.
NP241 rear seal
Moderators: Greenleaf, BC847, Richie O
3 posts
• Page 1 of 1
NP241 rear seal
by Tacoclaw » Sat Aug 30, 2014 5:04 pm
Alrighty, I'm swapping the NP241 from the gasser setup in place of the NP205 I'm running now. Losing a few lbs in conjunction with the lower lo-range seems like a win-win. Truck doesn't work hard enough to warrant a 205.
Problem is that the 1410 yoke from the 205 has a larger diameter than the 13xx yoke from the 241. Does anyone know a part number for the seal that fits the 241 bore and the 205 1410 yoke?
A couple hours of googling hasn't gotten me anywhere.
Problem is that the 1410 yoke from the 205 has a larger diameter than the 13xx yoke from the 241. Does anyone know a part number for the seal that fits the 241 bore and the 205 1410 yoke?
A couple hours of googling hasn't gotten me anywhere.
1990 W250 4x4
Rattles, growls, whistles, and whines.
Rattles, growls, whistles, and whines.
-
Tacoclaw - 14mm rotor
- Posts: 4108
- Joined: Wed Mar 11, 2009 7:50 am
- Location: Cheshire, OH
Re: NP241 rear seal
by bgilbert » Sat Aug 30, 2014 8:24 pm
You might get ahold of Mark Nixon. He talked about this at one time IIRC. I'm interested as I might be doing the same with my gasser puller some day.
Bill Gilbert
85 D350 crew with 90 6BT intercooled Getrag 3.07's
93 D350 single cab Getrag 3.54's.
85 D350 crew with 90 6BT intercooled Getrag 3.07's
93 D350 single cab Getrag 3.54's.
- bgilbert
- 14mm rotor
- Posts: 2253
- Joined: Wed Jan 03, 2007 5:04 pm
- Location: Terre Haute, Indiana