Here's is the NP 205 Shim Kit part number from Mopar

How they work, how they don't work, and how to fix them

Moderators: Greenleaf, BC847, Richie O

Here's is the NP 205 Shim Kit part number from Mopar

Postby Collers9640 » Thu Apr 28, 2016 3:37 pm

Just wanted to post the part number for NP 205 to save people from spending $38 on shims from quad4x4 (Ridiculous).
The package reads

Mopar
part # 00015128
Shim Kit
3110
77’ W200 Cummins- Auto, BHAF, 4” Exhaust
91.5 W250 Cummins Conversion- PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1984 D350 Crew Cab (Future Cummins Project)
Collers9640
fuel screw!!!!
 
Posts: 171
Joined: Wed Feb 24, 2010 4:25 pm
Location: Charleston SC

Re: Here's is the NP 205 Shim Kit part number from Mopar

Postby thrashingcows » Sat Apr 30, 2016 1:58 am

What was the cost through Ma Mopar?
1984/93 Dodge Crewcab, W350, 1 Ton SRW, long box, 330K Km's, M&H spacer, 366 spring, fuel pin to deep side, 14cm housing, Piston LP, PS IC, Isspro Boost, Pyro and tach, NV4500, 29 spline NP205, 3.54's.


Check out the build....http://www.dieseltruckresource.com/dev/ ... 05923.html
thrashingcows
14mm rotor
 
Posts: 575
Joined: Wed Nov 02, 2011 12:00 am

Re: Here's is the NP 205 Shim Kit part number from Mopar

Postby Collers9640 » Sun May 08, 2016 10:10 am

I purchased them through zbag
77’ W200 Cummins- Auto, BHAF, 4” Exhaust
91.5 W250 Cummins Conversion- PS I/C, pump maxed, Red Oak Diesel Injectors, Coolertubz, pump advanced 1/8", 3" elbow, 3200 Spring, Piston Lift Pump, KDP fixed, DennyT pin, HX35, 4in Downpipe, BHAF, Heater Grid Delete, Alcan springs, Bilstein Shocks
1984 D350 Crew Cab (Future Cummins Project)
Collers9640
fuel screw!!!!
 
Posts: 171
Joined: Wed Feb 24, 2010 4:25 pm
Location: Charleston SC
Top


Return to Transmission

Who is online

Users browsing this forum: No registered users and 6 guests