by josh_6bt » Fri May 20, 2011 8:35 pm
Hello, I recently wired an aftermarket stereo in my 92 W250 and I ran into some problems. First off I bought the E2 wiring harness that adapters the factory harness to a aftermarket deck and wired it correctly. I tested the deck to make sure everything was fine, everything worked as it should no problems, however when It finally came to installing the deck in the dash things went wrong. When I got the deck installed in the dash I checked the deck again by turn the key to accessory and I found the deck didnt work, "WTF" right. I pulled it all apart and found that the wire that is my "constant power" isnt so constant. I checked all fuses and all were good, I have no idea where to start tracing wires. I also noticed that my OD Off and Cargo buttons no longer work and I lost my interior light as well

. Anyone got a wiring diagram for this truck? or some ideas. Its got me beat.
1992 W250 EC, 5 speed, 3.54s, 175hp p-pump, timed @ 16.5, #100 fuel plate, 4k GSK, 5x14, .024 DV, head studs, 60lb VS, 4" exhaust, BHAF, cooler tubz.