cab light measurement please

[loco one]

Hello guys, newbe here ! I want to install roof cab lights ( old style ,gottem ) I have some measurements already , but I need to make sure I drill the holes at the stock locations ? would somebody have the measurements for the outside light (last light on cab ) I know I"m asking for some of your time so heres a BEER & popcorn ! Thanks Loco one

[Philip]

the middle light is obviously in the center and located 4 3/4" back from the gutter to the front of the lens.

the next two lights are 7" on center from the middle one and are aligned in a straight line with the middle light.

the two outside lights are 24 1/4" on center from the middle light and are
set 2 1/2" inches further back than the middle 3 lights.

[loco one]

Thanks, would you be the Guy from DtR ? that is in the stickies ? I have another ? I"m going to only drill one outside hole first , & then try to run my wire down the windshield post ? Hope I can find my way down ?? is it passable ? & I did have that 24 1/4 measurement but I was not sure ,Those lights on the side look way out there ? Thanks

[Philip]

I grab that from TDR. The outside markers are way out there.