electrical shorout

Does it have spark? And other questions...

Moderators: Greenleaf, BC847, Richie O

electrical shorout

Postby TTipswprd » Sun Nov 01, 2009 9:32 am

Well after all the buckin my truck around in the snow last few days, i have lost my radio and cab lights. still have lights for my gauges and my dashboard. plannin on pulling the dash of here real soon but dont know what to look for. anyone have any thoughts?
1992 w250 4x4, pump tuned, custom exhaust, intake, and dennyT fuel pin, cooler tubz, 5x.014's from SDX
TTipswprd
fuel screw!!!!
 
Posts: 138
Joined: Thu Aug 13, 2009 5:14 pm
Location: Cheyenne Wy

Postby TTipswprd » Mon Nov 09, 2009 12:20 pm

okay found it was just a fuse. today the lights went back out. Any idea why this fuse keeps blowing? anyone?
1992 w250 4x4, pump tuned, custom exhaust, intake, and dennyT fuel pin, cooler tubz, 5x.014's from SDX
TTipswprd
fuel screw!!!!
 
Posts: 138
Joined: Thu Aug 13, 2009 5:14 pm
Location: Cheyenne Wy

Postby diesel freak01 » Mon Nov 09, 2009 1:12 pm

be my guess you have a hot wire shorting straight to ground if its popping the fuse. loss of a fuse means that its allowing to much amperage to flow and thats why the fuse blows. look for a bare wire before the load aka whatever it is hooked to. if its your gauges follow that wire out of the fuse panel and into the harness and look for a obvious place it can ground out would be where i would start. hope this helps
1993 d350 ctd drw 2wd auto
diesel freak01
fuel screw!!!!
 
Posts: 456
Joined: Tue Jul 07, 2009 7:30 am
Location: mcarthur ohio
Top

Postby TTipswprd » Mon Nov 09, 2009 5:12 pm

thats what i would of thought but my gauge lights still work. so it cant be the gauges
1992 w250 4x4, pump tuned, custom exhaust, intake, and dennyT fuel pin, cooler tubz, 5x.014's from SDX
TTipswprd
fuel screw!!!!
 
Posts: 138
Joined: Thu Aug 13, 2009 5:14 pm
Location: Cheyenne Wy
Top

Postby TTipswprd » Thu Nov 12, 2009 2:15 pm

okay so what i have found was a plastic wire harness on the drivers side fender had become eroded. when i lifted up on the harnsess, the wire broke off. Do you think this is the problem or is this just another problem that i don't see right now?
1992 w250 4x4, pump tuned, custom exhaust, intake, and dennyT fuel pin, cooler tubz, 5x.014's from SDX
TTipswprd
fuel screw!!!!
 
Posts: 138
Joined: Thu Aug 13, 2009 5:14 pm
Location: Cheyenne Wy
Top

Postby diesel freak01 » Thu Nov 12, 2009 2:37 pm

i would fix that and go from there its possible thats your problem right there
1993 d350 ctd drw 2wd auto
diesel freak01
fuel screw!!!!
 
Posts: 456
Joined: Tue Jul 07, 2009 7:30 am
Location: mcarthur ohio
Top


Return to Electrical

Who is online

Users browsing this forum: No registered users and 21 guests