4" Exhaust

[Okie Smokie]

I am changing to a S475 and definetely need to go to 4"if not larger. I currently have 3.5"exhaust from the turbo back. The way it's routed it runs between the t-case and frame above the cross member/skid plate. I'm afraid if I run 4" it will rub/vibrate against something at that point. So I was curious if you guys were routing it differently or wrapping it? Pic's of what you're doing would be great. Thanks in advance.

I hope I posted this in the right section. Help from the mod's if not.

[cmann250]

Diamond eye has a kit that includes all the funny bends. It's a turbo back system, but you'll probably need a special flange for that s475. Redneckroot on here sells the kit, i'm pretty sure. It's under $300 if i remember correctly

[Okie Smokie]

Thank you, looks like it's still routed the same way.

[jmd4x4]

The diamond eye 4 in fits just fine in the stock location, thats what I just put on my truck. You will need a new flange for your turbo. Hope this helps.

late
jmd

[Okie Smokie]

I have the 4" diamond eye exhaust installed on my truck now. The fit and quality is great.

Thanks all,

Joe

[Scrambled]

You can call Diamond Eye and talk with them about welding in the flange you need too. I talked with them when I did my HE351 swap but, ended up turning my own flange instead because I already had their exhaust system. And, yes their 4" system fits great around the transfer case. No issues.

[KurtzN1]

Give Diamond Eye a call. The customer service there is superb and they can usually answer most of your questions.