My muti color finaly leaked into the cab.

both inside and out

Moderators: Greenleaf, BC847, Richie O

My muti color finaly leaked into the cab.

Postby pulltilbroke » Tue Feb 14, 2012 12:22 am

Yep just like the title says. I now have a nice red seat in my 90. The old seat was givin my back fits on long drives and you guys know I've taken a few of those lately. I now sit 2-3 inches higher in the cab and that will take a little gettin used to. Probably gonna get a saddle blanket cover for it cause I'm lost with out the nifty front pocket the early seats had.

Scored this seat along with a few other goodies for the 93 at our local u pull it yard. I hate the red but the seat was to good to leave there.

Image
Image
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne

Re: My muti color finaly leaked into the cab.

Postby ahale2772 » Tue Feb 14, 2012 9:15 am

looks good!

I just recently pulled my cloth red seat out (ripped but still comfy) and put in a pleather one that is mint, but squishy and I bottom out... nothing worse than a crappy seat
84 CCLB W350 project
94' W350 Dually, Diesel, Auto 1080HP/1980FTlbs
User avatar
ahale2772
14mm rotor
 
Posts: 2353
Joined: Tue Jul 21, 2009 9:43 am
Location: massachusetts

Re: My muti color finaly leaked into the cab.

Postby pulltilbroke » Tue Feb 14, 2012 2:15 pm

Heres a couple better pics of the seat in the 90

Image
Image
Image
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top

Re: My muti color finaly leaked into the cab.

Postby CumminsPower59 » Tue Feb 14, 2012 3:08 pm

Looks good Andrew! I got a newish saddle blanket seat cover, you can have it. I will be in Ashland from the 9th to the 24th of next month, so I could run it by, then I could get that warped manifold from ya then too :D
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: My muti color finaly leaked into the cab.

Postby oldestof11 » Tue Feb 14, 2012 4:14 pm

Looks comfy! :mrgreen:
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: My muti color finaly leaked into the cab.

Postby RumbleFish » Tue Feb 14, 2012 4:14 pm

i like your cup holder
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: My muti color finaly leaked into the cab.

Postby Tacoclaw » Tue Feb 14, 2012 4:54 pm

That's gotta be an LE seat, since it has 2 cup holders.
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH
Top

Re: My muti color finaly leaked into the cab.

Postby CumminsPower59 » Tue Feb 14, 2012 8:24 pm

Tacoclaw wrote:That's gotta be an LE seat, since it has 2 cup holders.



:lol:
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: My muti color finaly leaked into the cab.

Postby pulltilbroke » Tue Feb 14, 2012 10:37 pm

Sounds good Ike. If you got any free time while your here I'll see if I can get our local Diesel crew to have a GTG while your here.


Duct tape cup holders are the best thing since sliced bread, Yeah its an LE 8)
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top

Re: My muti color finaly leaked into the cab.

Postby CumminsPower59 » Wed Feb 15, 2012 6:51 am

I know I will be involved with various training and such, but on the last day, Saturday the 24th, I will be free from mid day on.

I have been using 3" wide 100mph tape rolls for years as cup holders, they work great! :lol:
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: My muti color finaly leaked into the cab.

Postby pulltilbroke » Fri Feb 17, 2012 9:53 pm

Awesome I'll see if we can get a GTG going then.
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top

Re: My muti color finaly leaked into the cab.

Postby CumminsPower59 » Fri Feb 17, 2012 9:55 pm

Sounds good to me!
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top


Return to Body

Who is online

Users browsing this forum: No registered users and 17 guests