Who makes grill block-offs?

both inside and out

Moderators: Greenleaf, BC847, Richie O

Who makes grill block-offs?

Postby IRoss » Sun Sep 23, 2007 1:36 pm

I'm having trouble finding any in my local parts stores cataloques....anybody have any nice ones and where'd you get'em....
thanx, ian
91.5IC 4x4 5spd extra springs
valet, 190s, ,18cm, 4"ëxh.
H4 conversion w/relays
rwal mia w/prop. valve
IRoss
fuel screw!!!!
 
Posts: 43
Joined: Fri Sep 21, 2007 11:23 am
Location: YMIR BC(we got snow)

Postby IRoss » Sun Sep 23, 2007 2:56 pm

After doing some research on a few others sites, I have to conclude that there are absolutely none available....time to take a case of beer over to my buddy's plasma cutter....
91.5IC 4x4 5spd extra springs
valet, 190s, ,18cm, 4"ëxh.
H4 conversion w/relays
rwal mia w/prop. valve
IRoss
fuel screw!!!!
 
Posts: 43
Joined: Fri Sep 21, 2007 11:23 am
Location: YMIR BC(we got snow)

Postby wannadiesel » Sun Sep 23, 2007 4:04 pm

Lund makes a set of blockers for the '91 and up trucks. There's a company in Canada called Fia that makes full winter fronts.
'93 D350 LE Club Cab dually, Getrag, 3.54 Pow-R-Lok with: DPS EDM's, HTT Stage IV/14wg, Con-FE, Snow Stage 2 water/meth, custom fuel pin, Walbro secondary fuel system.

Best dyno: 408/844
User avatar
wannadiesel
diesel guru
 
Posts: 358
Joined: Mon Jan 01, 2007 6:25 pm
Location: New Holland, PA
Top

I use a company up here Called air hawg

Postby roxxx » Sun Sep 30, 2007 6:01 pm

I use a company up here Called air hawg, and they are resonably priced. I will see if they make them for the 1st gen, i need a set too so may as well ask them . i have put them on every truck we have bought with no problems and they are a bit thicker than some of the other brands
1992 4x4 Reg cab LE 5 speed
4 Inch lift
Bilsteins shocks 5125
VE moderately molested
Dana 80
ultra wheel rims Type 164
ASA pipe BHAF 19037
Outerwears prefilter
A A nv4500
South bend Flywheel and clutch 13125-OK

Stock 1993 4x4 Reg cab LE 5 speed
roxxx
fuel screw!!!!
 
Posts: 173
Joined: Sun Sep 09, 2007 9:12 pm
Location: Calgary Alberta Canada
Top

Postby RumbleFish » Sun Sep 30, 2007 6:46 pm

I had a set of the lunds for my 91. They were a bit of a PITA when it was time to take them off (or maybe I never figured out the right way???). This guy I know made a set from some plexiglass bought from the hardware store. Painted them black, drilled holes in each corner, and used zip ties to hold them one. He had less in them than I had in the ones I bought from lund.
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Postby ofcmarc » Sat Oct 20, 2007 4:51 am

I have a set of LUNDs and they work but aren't friendly to adjust dependant on the weather.

Local company up here makes some good winter fronts and / or bug screens for the summer.

http://www.alaskatent.com/products/cove ... fronts.htm
'92 W-250, Getrag, Pump Tweeked, 366 Spring, Fuel Pin Spun, 14cm W/G, 3.5in Exhaust, Pyro/Boost Gauges, Front End Leveled, 202K
ofcmarc
fuel pin?
 
Posts: 11
Joined: Sun Jun 17, 2007 9:06 pm
Location: 14mi North of North Pole
Top

Postby dpuckett » Sat Oct 20, 2007 6:44 pm

By "grille block offs" do you mean winter fronts? I have considered it, IF I ever move to a cooler climate. Heck, I still need AC, though there have been more roll-the-windows-down days lately.

Daniel
His- 93 W250 club cab LE, auto to Getrag conversion, piston lift pump, 3.54 LSD. 400k+
Hers- 04 QC 4x4. Built auto, Triple Dog, Air Dog. Funny Round truck that aint so quiet.
dpuckett
14mm rotor
 
Posts: 2196
Joined: Wed Jan 03, 2007 4:33 pm
Location: Perryville MO
Top

I am working on the grill inserts (summer and Winter)

Postby roxxx » Mon Oct 22, 2007 10:43 pm

I have talked to few company's about it, just waiting for a reply. they make inserts for newer models hoping I can Grin my way in to getting them to water jet us some I will keep you all posted
(Edit) rolling your Window down huh dpuckett Bahhh
1992 4x4 Reg cab LE 5 speed
4 Inch lift
Bilsteins shocks 5125
VE moderately molested
Dana 80
ultra wheel rims Type 164
ASA pipe BHAF 19037
Outerwears prefilter
A A nv4500
South bend Flywheel and clutch 13125-OK

Stock 1993 4x4 Reg cab LE 5 speed
roxxx
fuel screw!!!!
 
Posts: 173
Joined: Sun Sep 09, 2007 9:12 pm
Location: Calgary Alberta Canada
Top

Postby bgilbert » Sun Nov 04, 2007 7:46 pm

www.gofia.com is what Dave mentioned. I have a winter front and bug screen from them. Nice easy to install.
Bill Gilbert
85 D350 crew with 90 6BT intercooled Getrag 3.07's
93 D350 single cab Getrag 3.54's.
bgilbert
14mm rotor
 
Posts: 2253
Joined: Wed Jan 03, 2007 5:04 pm
Location: Terre Haute, Indiana
Top


Return to Body

Who is online

Users browsing this forum: No registered users and 5 guests