1stGen.org

THE place for 1st gens

Skip to content

Got The 89 Painted

both inside and out

Moderators: Greenleaf, BC847, Richie O

Post a reply

Got The 89 Painted

Postby RSWORDS » Fri Aug 22, 2008 8:47 am

The guys that painted it for me told me on the phone it looked horrible... Well I guess to them it does but to me it is AWESOME!!! I bought them some cheap @ss Dupla-Color pre mix stuff and it just does not laydown that mirror/flawless like the paint they use on their $8000-$15000 custom Hotrods paint jobs they are used to doing. Who would have guessed :D They are gonna wetsand then buff it out today... Any way here are some pics!

Image
Image
Image

There is a run in this pic that they are sanding out as we speak... You can kinda see how the paint is not that mirror smooth finish you would expect from a $10000 paint job... I have about $300 in this... Including the body work they did...
Image

Great improvement over this!!!

Image
Image

L&N Performance is getting me some decals made up... Gonna stick these on the doors like the 2nd Gens and add a black pin stripe, remove the badges on the fender paint the wheels black and black out the windows.

Image
User avatar
RSWORDS
14mm rotor
 
Posts: 820
Joined: Fri Feb 29, 2008 8:00 pm
Top

Postby RumbleFish » Fri Aug 22, 2008 10:03 am

you should have removed the fender emblems before paint. now you're gonna have holes that could have been filled in. looks good otherwise. wish i could find a $300 paintjob.
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Postby RSWORDS » Fri Aug 22, 2008 10:08 am

RumbleFish wrote:you should have removed the fender emblems before paint. now you're gonna have holes that could have been filled in. looks good otherwise. wish i could find a $300 paintjob.


Yeah The Guy Did take them off to paint it... Didn't decide to leave them off till he was done. He said bring it back and he can fill them and paint over it.
User avatar
RSWORDS
14mm rotor
 
Posts: 820
Joined: Fri Feb 29, 2008 8:00 pm
Top

Postby PToombs » Fri Aug 22, 2008 4:58 pm

Nice! It's sure white! :shock: I'll haveta get a pic of mine up. I had bugs, 2 runs, and all kinda crap in it. Screw it, it's a truck! You can't see a bug at 100mph thru the smoke anyways! :lol:


It's not a 2500 though. ;)
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby Richie O » Fri Aug 22, 2008 6:49 pm

I never noticed that the rear axle pushes that far forward while pulling. Almost rubbing fenders. Ouch!
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Postby RSWORDS » Sat Aug 23, 2008 9:17 am

Richie O wrote:I never noticed that the rear axle pushes that far forward while pulling. Almost rubbing fenders. Ouch!


The truck has a Dump Bed on it. The bed is 3 or 4 inches back from stock.
User avatar
RSWORDS
14mm rotor
 
Posts: 820
Joined: Fri Feb 29, 2008 8:00 pm
Top

Postby RSWORDS » Sat Aug 23, 2008 9:27 am

Another Pic

Image
User avatar
RSWORDS
14mm rotor
 
Posts: 820
Joined: Fri Feb 29, 2008 8:00 pm
Top

Postby mprmn08 » Sat Aug 23, 2008 9:30 am

2 things that look weird to me and maybe its just my eyes. but is the rear axle sittin a couple inches forward from center line and is the bed and cab tweaked cause from the last pic it looks like the top of the bed is touching the back of the cab and theres a gap in the bottom of the bed/cab area. like i said maybe its just me. :?
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top

Postby RSWORDS » Sat Aug 23, 2008 1:39 pm

RSWORDS wrote:
Richie O wrote:I never noticed that the rear axle pushes that far forward while pulling. Almost rubbing fenders. Ouch!


The truck has a Dump Bed on it. The bed is 3 or 4 inches back from stock.


;-)
User avatar
RSWORDS
14mm rotor
 
Posts: 820
Joined: Fri Feb 29, 2008 8:00 pm
Top

Postby Richie O » Sat Aug 23, 2008 5:18 pm

I would have to move the spring hangers back or take out that dump body. Around here the cops would have ya stoped to see what was wrong with the axle. My dad got stoped with one of my 89's and he told him to never put sand in the sander again or he would call the scale truck. Had 2 go buy a new 1 ton so we could continue to plow and sand.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Postby Richie O » Sat Aug 23, 2008 5:21 pm

I am trying to decide if I should put my trim back on or leave it off when I get my 93 project done. I like yours without,, but they look nice with also... Just can't decide.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Postby PToombs » Sat Aug 23, 2008 6:52 pm

Richie, leave it off, or get sticker type. The salt gets in behind and helps it rot.
Just my nickels worth. ;)
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby GO OVRIT » Sat Aug 23, 2008 7:57 pm

RSWORDS wrote:
Richie O wrote:I never noticed that the rear axle pushes that far forward while pulling. Almost rubbing fenders. Ouch!


The truck has a Dump Bed on it. The bed is 3 or 4 inches back from stock.


You shoulda heard it before we made the bumpstops. The right rear would really grind on the bed when hooked to the sled.
The truck is really bright now....you need sunglasses to look at it. 8)
92 W250 ext cab 518, big sticks, a-1000, PDR HX40, 4" exhaust w/aeroturbine, pump tweaked, K&N filter Tims Cooler tubes and 3" i/c, gauges
GO OVRIT
14mm rotor
 
Posts: 554
Joined: Tue Nov 13, 2007 8:59 pm
Location: Gloucester Va.
Top

Re: Got The 89 Painted

Postby GO OVRIT » Sat Aug 23, 2008 8:01 pm

L&N Performance is getting me some decals made up... Gonna stick these on the doors like the 2nd Gens and add a black pin stripe, remove the badges on the fender paint the wheels black and black out the windows.

If you paint the wheels black Bobby....I don't think I can help work on it anymore. :pukel:
92 W250 ext cab 518, big sticks, a-1000, PDR HX40, 4" exhaust w/aeroturbine, pump tweaked, K&N filter Tims Cooler tubes and 3" i/c, gauges
GO OVRIT
14mm rotor
 
Posts: 554
Joined: Tue Nov 13, 2007 8:59 pm
Location: Gloucester Va.
Top

Re: Got The 89 Painted

Postby RSWORDS » Sun Aug 24, 2008 8:05 am

GO OVRIT wrote:L&N Performance is getting me some decals made up... Gonna stick these on the doors like the 2nd Gens and add a black pin stripe, remove the badges on the fender paint the wheels black and black out the windows.

If you paint the wheels black Bobby....I don't think I can help work on it anymore. :pukel:


Come on Mike you have seen how bad they look. All the clear that are on them is peeiling off and they look like general crap. Do you feel like polishing them? I dont :lol:
User avatar
RSWORDS
14mm rotor
 
Posts: 820
Joined: Fri Feb 29, 2008 8:00 pm
Top
Next
Post a reply

Return to Body

Who is online

Users browsing this forum: No registered users and 33 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group