tail lights

both inside and out

Moderators: Greenleaf, BC847, Richie O

tail lights

Postby bigbad_Canam » Sun Oct 24, 2010 6:08 pm

how much do the rear tail lights cost for a 92 dodge cummins? what would a resonable price be?
bigbad_Canam
fuel screw!!!!
 
Posts: 41
Joined: Fri Oct 15, 2010 1:39 pm
Location: Racine WI

Re: tail lights

Postby 12valve350 » Thu Oct 28, 2010 10:22 pm

Check your local scrap yards for them. I believe the tail lights from the first gen dakotas will fit the full size rams but not 100% sure.
Six in a row makes 'er go, Eight in a v, theres nothin' too see!
12valve350
fuel screw!!!!
 
Posts: 112
Joined: Sun Aug 23, 2009 9:08 pm
Location: Dyer, Indiana

Re: tail lights

Postby Richie O » Fri Oct 29, 2010 2:22 pm

12valve350 wrote:Check your local scrap yards for them. I believe the tail lights from the first gen dakotas will fit the full size rams but not 100% sure.

They will. The surround is a little different but it fits fine. If you put 2 side by side you might see the difference. I bought a dakota one real cheap for my 92. It had a small crack in it but was way better then the one it replaced.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: tail lights

Postby The_Head » Fri Oct 29, 2010 4:29 pm

This information is good to know.

What year are first gen Dakotas?
1992 Dodge Power Ram 250 (sold)
2014 Dodge Ram 2500 Tradesman, RC, 4WD, G56, Traxda 2.5/1" leveling kit
User avatar
The_Head
14mm rotor
 
Posts: 791
Joined: Sun Dec 06, 2009 9:04 am
Location: WyO
Top

Re: tail lights

Postby 12valve350 » Sat Oct 30, 2010 9:23 am

87 to...94 or 95 i think. If it dont have a 12valve then i get confused :roll:
Six in a row makes 'er go, Eight in a v, theres nothin' too see!
12valve350
fuel screw!!!!
 
Posts: 112
Joined: Sun Aug 23, 2009 9:08 pm
Location: Dyer, Indiana
Top

Re: tail lights

Postby RumbleFish » Sat Oct 30, 2010 2:37 pm

87 to 96 dakotas will work. late 80's early 90's jeep comanchees look like they use the same taillight as well.

Oreillys has new tails, with the black border, for $30 each.
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: tail lights

Postby matchew » Mon Nov 01, 2010 6:57 pm

http://www.google.com/#q=1992+dodge+tru ... 7490458332


Check out the longest link in history....I got mine for $49.00 each brand new IIRC, from on eof the sites listed.
92 1 ton, 7" lift 37 military MT's on Hummer Alcoas, HE341, 4" downpipe to tailpipe, killer front bumper, 14mm H+R, +40 injectors, 03 dodge seats, loud tunes. 'Custom' Rustoleum paint.
User avatar
matchew
fuel screw!!!!
 
Posts: 156
Joined: Sun Nov 30, 2008 8:37 pm
Top

Re: tail lights

Postby tinaflux » Wed Nov 17, 2010 7:34 am

matchew,

Thanks dude. I am searching for parts for the same model. :)
tinaflux
fuel pin?
 
Posts: 7
Joined: Wed Nov 17, 2010 7:24 am
Top

Re: tail lights

Postby bmoeller » Sun Feb 13, 2011 4:14 pm

NEW- '82 CREW cab dually. Cummins, NV5600, 205, D60/D80. :D Work in progress......

'93 W350, CTD, ext cab, 5spd., HTT modded H1C, 4" exhaust, Kelderman single bag. 537k and counting!

SOLD- '92 W250, CTD, ext cab, 5spd

SOLD- '99 3500, SO CTD, 5spd

Traded off- '97 3500 CTD, 416hp/892tq.

Obama loves America, like OJ loved Nicole...................
User avatar
bmoeller
14mm rotor
 
Posts: 1448
Joined: Sat Feb 27, 2010 7:22 am
Location: NW IL
Top

Re: tail lights

Postby Mark Nixon » Fri Feb 18, 2011 10:00 pm

RumbleFish wrote:..late 80's early 90's jeep comanchees look like they use the same taillight as well.

Not even close!
Been there tried that.

Mark.
Mark Nixon
 
Top

Re: tail lights

Postby 555_triple_nickel » Tue Mar 08, 2011 2:30 am

Anybody know where i can get just the chrome trim for the taillights at ?
more duct tape !
User avatar
555_triple_nickel
fuel pin?
 
Posts: 12
Joined: Sun Jan 30, 2011 12:27 am
Location: Lynden Washington
Top

Re: tail lights

Postby Mark Nixon » Tue Mar 08, 2011 6:29 am

The taillights are only sold as a complete assembly.

Mark.
Mark Nixon
 
Top

Re: tail lights

Postby casanova909 » Thu Apr 28, 2011 7:11 am

anyone know where or if you can git aftermarket LED tail lights
92 W250, BullyDog fuel pin, 3200 governor spring, pump turned up slightly, AFE cold air intake, strait piped
{Crazy Cowboy}
casanova909
fuel pin?
 
Posts: 17
Joined: Sun Apr 10, 2011 8:53 pm
Top

Re: tail lights

Postby autoglassman » Mon May 16, 2011 9:07 pm

i would love to know where to get aftermarket taillights as well, :?: :?: :?: i have looked all over the place!
autoglassman
smoke screw?
 
Posts: 1
Joined: Mon May 16, 2011 8:53 pm
Top

Re: tail lights

Postby Richie O » Tue May 17, 2011 4:47 am

1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Next

Return to Body

Who is online

Users browsing this forum: No registered users and 39 guests