customizig interior ne ideas???

both inside and out

Moderators: Greenleaf, BC847, Richie O

customizig interior ne ideas???

Postby good ol boy » Sat Dec 25, 2010 2:49 pm

id like to customize my interior and only have a few ideas need help
1990 5 spd, hx 35, fuel cranked, other minor pump ajustments, pod injectors, coolertubes intake horn, denny t stage 2, finishing restoration, new cab, a fender, a door, front bumper, mirrors, fresh paint, etc...Things in progress, 1\8 in timing bump, 6 in mitre cut stacks, wheels and 35 in tires
good ol boy
fuel pin?
 
Posts: 6
Joined: Sat Dec 25, 2010 1:51 pm
Location: mchenry md

Re: customizig interior ne ideas???

Postby Ptothej » Mon Dec 27, 2010 9:27 am

How do you want to customize it and what are you looking to do.. show/functionality?
'92 W250, 5spd, reg. cab, 2" lift, 4" dp, 4"exhaust no muffler, smoke screw bottomed out, star wheel bottomed out, full power screw maxed, BD fuel pin, BD 16cm housing (30psi), K&N air filter with a modified factory air box
Ptothej
fuel screw!!!!
 
Posts: 132
Joined: Mon Feb 22, 2010 4:22 pm
Location: Kamloops, B.C

Re: customizig interior ne ideas???

Postby good ol boy » Tue Dec 28, 2010 11:13 pm

idk really my trucks almost done and i was tryin to find somthin to do er up a lil bit
1990 5 spd, hx 35, fuel cranked, other minor pump ajustments, pod injectors, coolertubes intake horn, denny t stage 2, finishing restoration, new cab, a fender, a door, front bumper, mirrors, fresh paint, etc...Things in progress, 1\8 in timing bump, 6 in mitre cut stacks, wheels and 35 in tires
good ol boy
fuel pin?
 
Posts: 6
Joined: Sat Dec 25, 2010 1:51 pm
Location: mchenry md
Top

Re: customizig interior ne ideas???

Postby Ptothej » Wed Dec 29, 2010 9:23 am

Hmmmm, dont have much thoughts on that I mean possibilites are endless but where do you start where do you end? Paint the dash and trim a different color? Custom gauge pods/a pillar gauge pod with gauges, captain chairs/buckets out of a van with center console? Carpet instead of rubber-vinyl floor, and if carpeted, change color? Interior lighting.. under dash.. doors etc.. dunno man maybe some of those suggestions will help
'92 W250, 5spd, reg. cab, 2" lift, 4" dp, 4"exhaust no muffler, smoke screw bottomed out, star wheel bottomed out, full power screw maxed, BD fuel pin, BD 16cm housing (30psi), K&N air filter with a modified factory air box
Ptothej
fuel screw!!!!
 
Posts: 132
Joined: Mon Feb 22, 2010 4:22 pm
Location: Kamloops, B.C
Top

Re: customizig interior ne ideas???

Postby RumbleFish » Wed Dec 29, 2010 10:31 am

I've always wanted to mount a machine gun turret to my roof. I'm sure that would take a custom headliner at least.
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: customizig interior ne ideas???

Postby PToombs » Wed Dec 29, 2010 5:18 pm

And a special round sunroof! :lol:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11369
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: customizig interior ne ideas???

Postby ellis93 » Wed Dec 29, 2010 8:40 pm

I'm more practical than you guys. I'm taking out one of my back seats and putting in one of those incinerator RV toilets :lol:

Almost forgot the exhaust(fart) fan :mrgreen:
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7762
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: customizig interior ne ideas???

Postby good ol boy » Fri Dec 31, 2010 3:54 pm

yea them ideas all helped, but i was thinkin more like a sniper rifle haha
1990 5 spd, hx 35, fuel cranked, other minor pump ajustments, pod injectors, coolertubes intake horn, denny t stage 2, finishing restoration, new cab, a fender, a door, front bumper, mirrors, fresh paint, etc...Things in progress, 1\8 in timing bump, 6 in mitre cut stacks, wheels and 35 in tires
good ol boy
fuel pin?
 
Posts: 6
Joined: Sat Dec 25, 2010 1:51 pm
Location: mchenry md
Top

Re: customizig interior ne ideas???

Postby Richie O » Fri Dec 31, 2010 6:59 pm

Pretty much find a shop that does auto interior and kick around some ideas on colors, seats ect. As said above I have seen some people paint the dash panel, change the gauge face color, stuff like that.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: customizig interior ne ideas???

Postby truckwrench1 » Thu Jan 13, 2011 5:30 pm

check out www.fiberglassforum.com the possibilitys are endless as long as you pocketbook holds up! :D
truckwrench1
fuel screw!!!!
 
Posts: 53
Joined: Sat Aug 07, 2010 6:09 pm
Location: miami, oklahoma
Top

Re: customizig interior ne ideas???

Postby burnt_servo » Thu Jan 13, 2011 9:18 pm

RumbleFish wrote:I've always wanted to mount a machine gun turret to my roof. I'm sure that would take a custom headliner at least.

i've got one of those mounted in the box of my m37 :D
'93 w250 .... stock ...
curently removing the dead moose parts ....
User avatar
burnt_servo
fuel screw!!!!
 
Posts: 472
Joined: Wed Dec 26, 2007 2:19 pm
Location: northern b.c. , canada
Top


Return to Body

Who is online

Users browsing this forum: No registered users and 30 guests