cummins swap in to a 89 dodge w250 gasser
Moderators: Greenleaf, BC847, Richie O
3 posts
• Page 1 of 1
cummins swap in to a 89 dodge w250 gasser
by BIG BAD BENTON » Sat Jun 05, 2010 7:04 pm
hi im new to this site and i really cant afford to buy a dodge cummins so ive decided to make one out of the truck i have now which is an 89 dodge w250 auto 4x4 would any body be able to give me tips and or tell me what all i would need for the swap, and how difficult it will be. thanks
- BIG BAD BENTON
- smoke screw?
- Posts: 4
- Joined: Sun Aug 23, 2009 9:31 pm
Re: cummins swap in to a 89 dodge w250 gasser
by Richie O » Sat Jun 05, 2010 7:10 pm
You need a rusted out donor with all the parts. If it is complete then its all bolt in. You really need a complete parts truck, don't try to buy pieces and parts. You should be able to find a complete truck in the 1500 to 2000 range. Maybe less if you get lucky.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
-
Richie O - Administrator
- Posts: 4171
- Joined: Sat May 17, 2008 9:01 pm
- Location: New England