My Newest addition / project

Cummins Conversion & Builds

Moderators: Greenleaf, BC847, Richie O

My Newest addition / project

Postby Free89W350 » Tue Mar 01, 2011 9:12 pm

My plan is a 2wd flat bed lowered with a p-pumped 5 speed, but might end up being a ve for a bit. Needs alot but the extra cab is a big plus. I also plan on doing quite a bit of custom 1 off stuff just to set it apart from the rest of them out there. :D

Image
Image
Image
Image
05 GMC Sierra Z71 6.5" lift and 35's
95 VW Golf VR6 5 spd

Gone but not forgoton :(
89 W350, Auto, Non Intercooled, 3.07 rears, Star wheel full up, full power as far as possible, smoke screw just a plug, fuel pin ground & washer shaved .90, 366 spring. Jardine 4" exhaust.
Free89W350
fuel screw!!!!
 
Posts: 57
Joined: Sat May 12, 2007 6:27 pm
Location: Pen Argyl, Pa

Re: My Newest addition / project

Postby Tacoclaw » Wed Mar 02, 2011 2:52 pm

Looks like it didn't want to leave. :lol:

G/L with it, man. I'm starting to get a little jealous of all these 4 doors running around, but at least it's never my turn to drive with the single cab.
1990 W250 4x4
Rattles, growls, whistles, and whines.
User avatar
Tacoclaw
14mm rotor
 
Posts: 4108
Joined: Wed Mar 11, 2009 7:50 am
Location: Cheshire, OH

Re: My Newest addition / project

Postby PToombs » Wed Mar 02, 2011 6:02 pm

Tacoclaw wrote:Looks like it didn't want to leave. :lol:


I missed that until I looked again. :lol:
Ryan, now I see where all your money is going! ;)
8)
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: My Newest addition / project

Postby Free89W350 » Thu Mar 03, 2011 9:11 am

I've been after this truck for a while now and he finally gave in and boy did I get one heck of a deal ;) . It is going to be a big project but should be really cool when its done. I will keep everyone updated as time goes on now I just need find a place to put it.


PToombs wrote:I missed that until I looked again. :lol:
Ryan, now I see where all your money is going! ;)
8)
05 GMC Sierra Z71 6.5" lift and 35's
95 VW Golf VR6 5 spd

Gone but not forgoton :(
89 W350, Auto, Non Intercooled, 3.07 rears, Star wheel full up, full power as far as possible, smoke screw just a plug, fuel pin ground & washer shaved .90, 366 spring. Jardine 4" exhaust.
Free89W350
fuel screw!!!!
 
Posts: 57
Joined: Sat May 12, 2007 6:27 pm
Location: Pen Argyl, Pa
Top

Re: My Newest addition / project

Postby PToombs » Fri Mar 04, 2011 4:06 pm

Gregs house! :mrgreen: He'd never notice another project there, JR's stuff is there 1/2 the time anyways. :lol:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Re: My Newest addition / project

Postby Free89W350 » Fri Mar 04, 2011 8:49 pm

PToombs wrote:Gregs house! :mrgreen: He'd never notice another project there, JR's stuff is there 1/2 the time anyways. :lol:



If it was a little bit closer but the 2 hour drive to work on it would be to much. On the other hand I think if I took it there he would end up tinkering with it.
05 GMC Sierra Z71 6.5" lift and 35's
95 VW Golf VR6 5 spd

Gone but not forgoton :(
89 W350, Auto, Non Intercooled, 3.07 rears, Star wheel full up, full power as far as possible, smoke screw just a plug, fuel pin ground & washer shaved .90, 366 spring. Jardine 4" exhaust.
Free89W350
fuel screw!!!!
 
Posts: 57
Joined: Sat May 12, 2007 6:27 pm
Location: Pen Argyl, Pa
Top

Re: My Newest addition / project

Postby PToombs » Sat Mar 05, 2011 7:17 pm

Yup, you'd only have to do 1/2 the work. :lol:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top


Return to Conversions & Builds

Who is online

Users browsing this forum: No registered users and 51 guests