Correction...............
Yes, the 0 432 131 837 p/n is a 4 hole injector............ I was thinking of another p/n.
Moderators: Greenleaf, KTA, BC847, Richie O
jkidd wrote:Good info here.
0432131837 are 4x.013... are you sure yours are 5x.012
For a little more info on our 7 hole injectors
we have 7x.0105 with slight extrude hone and flow matched with liquid at 100BAR (about 1500 psi) instead of air at 50psi as is common in the industry. They are hotter than our 5x.013
out 7x.012 have some needle work, extrude hone, flow matched with liquid at 100BAR (about 1500 psi) instead of air at 50psi as is common in the industry and no edge filters. These are very close to 5x.016 in flow.
Aftermarket bodies are also available so there is no core charge if you already have performance injectors you want to keep, stock injectors or have 9mm that no one will give you credit for.
Users browsing this forum: No registered users and 9 guests